 |
24 different grades of foam products |
Dunlop Foams |
Foam |
 |
|
5 |
|
|
Yes |
Yes |
|
The Dunlop foam products are exempt from resin code requirements, Polyurethane and Latex dominate the foam market and are easily differentiated by recyclers. |
|
Yes |
HCFC and HFC are not used as blowing agents, Dunlop Foams stopped using CFC in July 1993. Methylene Chloride (dichloromethane) is not used as a blowing agent in the nominated product range. However, it is used in other products and will be phased out. |
Yes |
|
|
Water based glues are used for adhesives in the nominated product lines. |
No Arsenic, Cadmium, Chromium, Copper, Lead, Mercury Fluorine, Chlorine, Pentachlorophenol (PCP) or Tar oils (benzo(a)pyrene) are used during manufacture of the nominated products. |
There is evidence that no use is made of halogenated organic substances or solvents, analine based amines, phthalates DEHP, DBP, DAP or BBP, Aziridine or polyaziridines, nor is there use of pigments and additives that contain lead, arsenic, cadmium, etc |
|
Yes |
|
5 |
|
|
Yes |
The nominated product range is a new 'green product line' by Dunlop Foams and there is a Welcome Pack to accompany the products. They are intended to be used for soft furnishings such as cushions, pillows, upholstery fill, head rests, overlays and quilting. The Welcome Pack has appropriate, written product information. |
Yes |
Yes |
|
 |
Ahrend Revolt, A500, A700, Facet |
Arredorama |
Chair, Workstations, Tables |
|
|
5 |
Arredorama uses timber certified under the Environmental Choice Australia Eco-Label |
|
Yes |
Yes |
|
|
|
Yes |
|
Yes |
|
|
Arredorama does not use adhesives in the products nominated as subject of this document. |
|
Arredorama does not use or add any of the hazardous materials or prohibited substances (including PVC) |
Arredorama products can be disassembled without specialized tools or expertise to facilitate the recovery of the constituent materials for recycling. |
Yes |
The nominated Arredorama products are not coated or treated in a way that would prevent recycling. |
5 |
|
|
Yes |
The certified Arredorama products come with sufficient product information regarding cleaning, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Akril Panel |
Akril |
Plastic Splashback for Kitchens, Bathrooms, Feature Walls, Commercial Fitouts, Wall Cladding, Signage |
|
|
10 |
|
Akril Panel does not contain timber, therefore these criteria are not applicable. |
Yes |
Yes |
Akril Panel does not contain timber, therefore these criteria are not applicable. |
The product is entirely made of plastic, Network Coatings print stickers which are attached to the products, displaying the resin code, and the company web site contains a page with the recycling code displayed. |
|
Yes |
The product range does not contain synthetic latex, therefore this criterion is not applicable. |
Yes |
The Akril Panel product does not contain any fabrics, therefore this criterion is not applicable. |
The Akril Panel product does not contain any glass, therefore this criterion is not applicable. |
GECS have reviewed tests which show the adhesive recommended for use with the products, Bostik V60 Silicone, is complaint to the requirements of this criterion. |
Not Used |
|
The product is a single sheet of plastic, after installation it can easily be dismantled for the purpose of recycling. |
Yes |
No treatment is applied to the Akril Panel product that will prevent recycling. |
0 |
|
|
Yes |
|
Yes |
Yes |
|
 |
AL Group, P2 Management Program, T-Platform |
Bene |
Desks, Storage, Tables, Workstations |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
The timber derived materials used have formaldehyde emissions lower than 0.12mg/m3 |
|
|
Yes |
|
Yes |
Bene Australia is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
The glass used does not contain any of the prohibited heavy metals, and is not manufactured or finished in a way which would prevent recycling. |
The adhesives used are non-solvent based and comply with the requirements of GECA 01-2007 Adhesives. |
|
No hazardous materials are added to the products during manufacture. |
The certified products are sufficiently separable to allow recycling. |
Yes |
The products are not coated in a way which would affect recyclability. |
5 |
|
|
Yes |
|
Yes |
Yes |
The plastic packaging used is non-halogenated and recyclable. Particleboard crates are re-used wherever possible then reprocessed by Benes recycling department. |
 |
Altitude, i.am u.r carbon neutral, Incognito and Trapeze, i.am Turn and Incognito Folding, Eona |
Thinking Ergonomix |
Metal desk and table bases
|
|
|
5 |
Timbers used in the nominated products are certified with Environmental Choice Australia Mark |
|
Yes |
Yes |
Thinking Ergonomic uses timber certified with Environmental Choice Australia Mark, therefore are in compliance to the requirements of this criterion |
GECS has confirmed that the plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code |
|
Yes |
|
Yes |
|
|
|
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Thinking Ergonomix products are not treated or coated in any way that would prevent their post consumer recycling. |
5 |
|
|
Yes |
These nominated Thinking Ergonomix products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
BE Chair, Hum/ Free/ Grid Workstations, Traffic Storage |
Formway |
FOR-2010
Task Chair, workstations, storage products
|
|
|
10 |
They are low in VOCs and have not been sourced from controversial sources |
|
Yes |
Yes |
|
GECS has confirmed that all plastic components with a mass greater than 100g have been marked with the appropriate resin identification code for end of life recycling |
|
Yes |
|
Yes |
Formway Distribution Ltd upholsters these nominated products with GECA, EU Flower or Nordic Swan certified fabrics to ensure that the fabrics applied to the furniture and fittings will comply with GECA 28:2006 |
This criterion is not applicable to these nominated Formway Distribution Ltd products as glass is not a component |
The adhesives used by Formway Distribution Ltd to manufacture these nominated products have been found to comply with the requirements of this criterion of GECA 28:2006 |
|
GECS has confirmed that no prohibited or hazardous substances as stated for this criterion have been added or used at any stage during the manufacturing process including the preparatory agents, cleaners and degreasers of the production facility |
GECS has confirmed that these nominated products can be disassembled without specialized tools or expertise to facilitate the recovery of the constituent materials for recycling. |
Yes |
GECS has confirmed that these nominated Formway Distribution Ltd products are not coated or treated in any way that would prevent recycling |
10 |
This criterion is not applicable to these nominated Formway Distribution Ltd products as they are not recycled furniture |
This criterion is not applicable to these nominated Formway Distribution Ltd products as they are not ceiling tiles |
Yes |
These nominated products are sold with a Product Stewardship Contract detailing end of life recycling. Formway also makes available Care and Maintenance Manuals and product brochures. The combination of all of this available material demonstrates compliance to this criterion. |
Yes |
Yes |
These nominated products are packaged with plastic and cardboard |
 |
Blade Workstation |
Office Planner |
An office workstation that offers several different orientations |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard |
|
Yes |
Yes |
Office Planner has provided formaldehyde test reports. The results show that the timbers meet the required formaldehyde emission limit set by the criterion |
GECS has confirmed that there are no plastic components over 100 grams |
|
Yes |
|
Yes |
Office Planner is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
|
The adhesives used for the certified Office Planner workstations are low VOC and do not contain hazardous materials restricted by the GECA Adhesives Standard |
|
GECS has confirmed that no hazardous or prohibited substances are used in the production |
The nominated products are easily disassembled into constituent materials without the use of specialised tools for end of life for recycling as required in the standard. |
Yes |
GECS has confirmed that no coatings or treatments are used on these products that would prevent their post consumer recycling |
5 |
|
|
Yes |
The product information provided at point of sale describes the instructions for use, care and recycling at end of product life satisfying the requirements of this criterion. |
Yes |
Yes |
|
 |
Bongo Stool, Bubble Stool, Bump Stool, Swell Stool, Mighty Chair |
Korban/Flaubert |
Polyethylene Stools and Chair
|
|
|
5 |
|
|
Yes |
Yes |
|
All of the plastic parts of the certified products are high density polyethylene and have been marked with the appropriate resin identification code of 2 HDPE |
|
Yes |
|
Yes |
|
|
|
Conformance to this criterion has been established through a review of material safety data sheets (MSDS) for all production ingredients. |
Analysis of the material safety data sheets for each of the components and substances used in the manufacture of the certified products has demonstrated that the Korban Flaubert products do not contain any hazardous substances. |
The Swell, Bongo, Bump and Mighty chair are all one piece and do not require separability. The Bubble Stool is comprised of two pieces that is easily disassembled with an Allen key. |
Yes |
The certified products are not coated or treated in a way which would prevent recycling. |
5 |
|
|
Yes |
The product information supplied to Korban Flaubert customers includes instructions for correct use, maintenance and recycling. |
Yes |
Yes |
The packaging used is recyclable, non-halogenated polyethylene and cardboard. Both of these materials are recyclable. |
 |
Bookshelves, cupboards, tables, workstations, hutches, desks, filing cabinets, returns, carrels, table tops, mobile library display and reception counters |
Peacock Furniture |
|
|
|
5 |
It has been confirmed that Peacock Furniture's Green Star Furniture range are constructed from particleboard that conforms to the requirements of this criterion. This is through delivery dockets and observations made during the site visit. |
|
Yes |
Yes |
The particleboard used is certified under the Environmental Choice Australia Ecolabel and thus conforms to the requirements of this criterion. |
The sole plastic component used in the products under assessment is the ABS edge strip, which is exempt from the requirements of this criterion |
|
Yes |
|
Yes |
|
Clear untreated float glass in compliance with the requirements of this criterion is available for use in the nominated products. |
The adhesives reviewed are compliant with the relevant requirements of the standard. |
Any component containing brass cannot be included in the manufacturing process due to contamination with copper, which is prohibited by this criterion. Furthermore, Chrome handle finishes are prohibited by the Furniture and Fittings Standard. |
none of the abovementioned carcinogenic substances is used in the products under assessment, other than the vinyl finish which contains a phthalate. Any products manufactured with this vinyl finish cannot be sold as a GECA certified product |
The furniture products manufactured by Peacock Furniture and subject of this document are able to be disassembled without the use of specialized tools or expertise. |
Yes |
The products are not treated or impregnated in a way that would prevent post consumer recycling. Melamine finishes are intended to further increase the useful life of products. |
5 |
|
|
Yes |
Sufficient product information is available at point of sale to satisfy the requirements of this criterion. |
Yes |
Yes |
|
 |
Boxta, Inca, Co2, V-Class, Emotion, Aztec, Estac, Verdi, Zebo, Chi, Bebe, Prana, Ki, Cube: Task, Executive and/or Visitor chairs |
Gregory Commercial Furniture |
Chairs |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
GECS has confirmed that the nominated products of Gregory Commercial Furniture do not contain any salvaged and reclaimed timbers during production. This criterion is not applicable. |
Yes |
Yes |
The new timber supplier has provided a formaldehyde emission report that shows compliance to this criterion. The other two timber suppliers have been previously certified and therefore are compliant with the requirements of this criterion. |
There are resin codes labeled on all plastic parts weighing over 100g. |
GECS has confirmed that the nominated products of Gregory Commercial Furniture do not contain any latex and therefore this criterion is not applicable. |
Yes |
Gregory Commercial Furniture nominated products use foams sourced companies that are certified to GECA standards. |
Yes |
Gregory Commercial Furniture is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
There is no glass in these Gregory Commercial Furniture nominated products and therefore this criterion is not applicable. |
Adhesives used in the certified range are water-based and therefore meet this criterion. |
A review of the production ingredients used in the manufacture of the products under assessment shows that none of the listed hazardous substances are used. |
A review of the production ingredients used in the manufacture of the products under assessment shows that none of the listed prohibited substances are used. |
A GECS certified assessor has undertaken an inspection of the products and found that there is no barrier to separation for recycling. |
Yes |
The nominated products are not treated or coated in a manner which would prevent recycling. |
5 |
|
|
Yes |
The brochures, labels and information available on the website confirm that the product information for the nominated products satisfy this criterion. |
Yes |
Yes |
|
 |
Brackets, Monitor Stand, Cable Tray/Tidy, Cable Housing, TV Lifter, Desk, Computer Trolley |
SVAR Australasia |
|
|
|
10 |
The timber component used by SVAR products is not originated from controversial sources such as illegal harvesting genetically modified organisms, recently established plantations impacting primary ecosystems and uncert. high cons. communities |
|
Yes |
Yes |
|
The plastic component used in the nominated product weigh less than 100g. The requirement of this criterion is not mandatory for plastic components weighing more than 100g |
|
Yes |
|
Yes |
|
|
|
The substances listed under Overall Loads are not intentionally added to the certified SVAR Australasia products during manufacture. |
The substances listed under Prohibited Substances are not added to the certified products or used as auxiliary chemicals during manufacture. PVC tambour doors are not included in the certified product range. |
The products are separable into constituent materials for recycling. |
Yes |
|
10 |
|
|
Yes |
The product information available to end users of the nominated products contain sufficient details regarding instructions for correct use and maintenance while the product stewardship document provides directions for recycling at end of life. |
Yes |
Yes |
|
 |
Cabinet Handles, D-Pull and Flush Pull Handles, Brass Cabinet handles, Coat Hooks and Door Stops, Leversets, Door Pull Handles, Bathroom Furniture |
Madinoz |
|
|
|
lifetime |
|
|
Yes |
Yes |
|
|
|
Yes |
|
Yes |
|
|
Environmental Assurance has determined the products are in compliance with the relevant requirements of the standard. |
Only Stainless Steel and Brass finishes are permitted for use in certified products. Chrome, nickel, powder coat or any other finishes are not included in the scope of certification. |
|
The products are separable into constituent materials into recycling. |
Yes |
No coatings or treatments are used on the nominated products that prevent post consumer recycling. |
lifetime |
|
|
Yes |
The product catalogue and product stewardship document covers all the required points of product information available to end users. |
Yes |
Yes |
|
 |
Cabinets, Lockers, Pedestals, Caddies, Shelving |
Profile Systems |
|
|
|
5 |
The timbers used by Profile Systems Pty Ltd do not come from controversial sources |
|
Yes |
Yes |
GECS has received air emissions test reports. The results show that the products meet the formaldehyde emission requirements specified by this criterion. |
The products are marked with appropriate resin identification codes on all plastic components weighing over 100 grams. |
|
Yes |
|
Yes |
|
|
The adhesive used in these nominated Profile Systems Pty Ltd products has been found to have low volatile organic compounds (VOCs) and meets the requirements of this criterion. |
|
GECS has confirmed that hazardous or prohibited substances are not added or used in the manufacturing of these nominated products. |
It has been demonstrated that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Profile Systems Pty Ltd products are not treated or coated in any way that prevents post consumer recycling. |
lifetime |
|
|
Yes |
These nominated Profile Systems Pty Ltd products are delivered with literature that discusses correct use and maintenance. The product stewardship policy details the recycling instructions. |
Yes |
Yes |
|
 |
Cabinets, Planter Boxes, Mobile Pedestals, Lockers, Stationery Cupboards, Bookcase Cupboards |
Elite Built |
|
|
|
5 |
This criterion is not applicable to these nominated Elite Built Pty Ltd products as timber and other natural materials are not components |
|
Yes |
Yes |
|
GECS has confirmed that for the nominated products any plastic component with a mass greater than 100g has been marked with the appropriate resin identification code for end of life recycling |
|
Yes |
|
Yes |
This criterion is not applicable to these nominated Elite Built Pty Ltd products as fabrics are not a component |
This criterion is not applicable to these nominated Elite Built Pty Ltd products as glass is not a component |
This criterion is not applicable to these nominated Elite Built Pty Ltd products as adhesives are not a component |
|
GECS has confirmed that no prohibited or hazardous substances as stated for this criterion have been added or used at any stage during the manufacturing process including the preparatory agents, cleaners and degreasers of the production facility |
GECS has confirmed that these nominated products, where applicable, can be disassembled without specialized tools or expertise to facilitate the recovery of the constituent materials for recycling. |
Yes |
GECS has confirmed that these nominated Elite Built Pty Ltd products are not coated or treated in any way that would prevent recycling |
5 |
|
This criterion is not applicable to these nominated Elite Built Pty Ltd products as they are not ceiling tiles. |
Yes |
These nominated products are covered by the Elite Repeat program ensuring returned products will either be reused or recycled for use in other steel products. Elite Built Pty Ltd also makes available Care and Maintenance Manuals and product brochures. The combination of all of this available material demonstrates compliance to this criterion. |
Yes |
Yes |
|
 |
Ceiling Tile Products |
Armstrong World Industries Pty Ltd - Ceiling Division |
|
|
|
30 |
Armstrong use recycled paper, typically newspaper and other post-consumer fibre in their manufacturing processes for these product lines. |
This criterion of the Standard is not applicable to the Armstrong Ceiling product range as they are not sourced from salvaged & reclaimed timber. |
Yes |
Yes |
This criteria is applicable and a requirement of 1 mg./lt is generally applied to panel products. The results indicate levels at around 0.3mg/lt |
This criterion of the Standard is not applicable to the Armstrong Ceiling product range as the product does not contain plastics. |
This criterion of the Standard is not applicable to Armstrong Ceiling product range as the product does not contain padding materials. |
Yes |
This criterion of the Standard is not applicable to Armstrong Ceiling product range as the product does not contain padding materials. |
Yes |
This criterion of the Standard is not applicable to Armstrong Ceiling product range as the product does not contain Fabrics. |
This criterion of the Standard is not applicable to Armstrong Ceiling product range as the product does not contain Glass. |
This criterion of the Standard is not applicable to Armstrong Ceiling product range as the product does not contain Adhesives. |
The range of ingredients have been assessed and found compliant to the above chemical restrictions. None of the above prohibited substances are used in the products under assessment. |
All manufacturing plants are now compliant with the requirements of this criterion of the Standard. |
There does not appear to be any technical barrier to the disassembly of the products under this certification from the ceiling matrix which is often made from steel, aluminum or plastic. The Armstrong products subject to this verification do not limit the disassembly and reuse of these supporting structures. The units are designed for replacement. |
Yes |
No coating or treatment is applied that will prevent recycling. |
0 |
|
|
Yes |
|
Yes |
Yes |
|
 |
Chairs, Meeting Tables and Workstations |
Direct Ergonomics |
|
|
|
10 |
Direct Ergonomics source EO Laminex board directly from Laminex Group for the manufacturing of their workstations. Direct Ergonomics sources plywood from a supplier which sources its wood from locally grown sustainable forest industries |
|
Yes |
Yes |
Direct Ergonomics source Formaldehyde free Plywood which is produced with the use of a water-based adhesive. |
A resin code is displayed as a numeral 5 sticker and will be visible to the end recycler. |
The site audit of the manufacturing plant conducted as part of this assessment has confirmed that there is no latex in the products under assessment |
Yes |
The foam used to manufacture the Direct Ergonomics furniture is sourced from suppliers that are currently certified by GECA. |
Yes |
Direct Ergonomic source GECA certified fabric. The furniture is sold as white furniture. A site assessment has confirmed the source of fabrics and white furniture arrangement with clients. |
|
A site assessment has verified the use of the water based glues and MSDSs supplied for the glues have been identified to comply with the requirements of this criterion. |
|
A site assessment and review of all MSDS's for chemicals used to manufacture the products under assessment, has not revealed any of the prohibited ingredients |
A site assessment to inspect the manufacturing process and inspection of the products under assessment has revealed no barrier to disassembly of the products in compliance to this criterion. |
Yes |
A site assessment has not revealed any coatings or treatments to interfere with the post consumer recycling of the products under assessment. |
10 |
Direct Ergonomics products under assessment contain no recycled furniture. |
|
Yes |
Direct Ergonomics has supplied GECS a sticker which is placed on the chairs when sold to the customer. This sticker outlines all the product information mentioned in this criterion. A site assessment to verify the use of the sticker has been identified. |
Yes |
Yes |
|
 |
Chairs: Tecton, Sitz, Generation, Piazza, Champion, Magnum |
Stem Intelligent Seating Pty Ltd |
|
|
|
5 |
The plywood shells in the nominated Stem Intelligent Seating range of chairs are sourced from FSC certificated forest, the certification was issued by Woodmark, UK |
N/A (No reclaimed timber) |
Yes |
Yes |
Cetec 0.2ppm < 0.3ppm |
The resin identification code is displayed on all plastic parts. |
|
Yes |
GECA has received confirmation from foam supplier, that states that the polyurethane foam used by Stem is in compliance with the requirements of this criterion. GECA has inspected contracts between foam supplier and a hazardous waste disposal company. |
Yes |
This certification only certifies the white furniture and does not cover the fabric that will be subject to the choice of Stem Intelligent Seating individual customers |
No glass |
Stem Seating make use of solvent-based adhesives in applying fabric to padding material. These products are high in VOC. Under the requirements of this criterion, Stem will be required to test water-based low VOC alternatives when these are available. |
GECA inspected MSDS for all production ingredients. These do not contain the substances mentioned in this criterion, in addition a statement by Drew Eaton Director, Stem Intelligent Seating, confirms this. |
None of the substances mentioned in this criterion are added to the products under assessment, this is apparent by a review of MSDS for all production ingredients |
The Stem range of chairs is largely mechanically fixed. There is no barrier to the disassembly of the product range; this was confirmed during a site assessment by a GECA qualified assessor |
Yes |
Yes |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
|
 |
Clover Workstation, Delta Executive Workstation, Delta Work Workstation. Zuco Chairs: Cubo, Cubo Net, Fiato, Puro, Visita, Conte, Conte Slim, Sarno |
Methis Australia |
|
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard |
|
Yes |
Yes |
The results show a very low formaldehyde emission well below the allowable limits as stated for this criterion |
GECS has confirmed that all plastic components weighing over 100g have been labeled or printed with the appropriate resin identification code for end of life recycling |
|
Yes |
GECS has confirmed that no hazardous materials, as listed in this criterion, are used in the production of the flexible Polyurethane padding that is contained in the Zuco chairs |
Yes |
Methis Australia is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
|
GECS has confirmed the adhesive used in the manufacturing of these products is water based and low in VOCÂÂÂÂÂÂ’s. This adhesive is compliant to the relevant requirements of GECA Standard No. 1: Adhesives |
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during the manufacturing process, this includes the cleaning of production equipment |
It has been demonstrated that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Methis Australia products are not treated or coated in any way that prevents post consumer recycling |
5 |
|
|
Yes |
These nominated Methis Australia products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Clue range of chairs: Clue upholstered visitor chairs, Clue laminate chair, Clue MB & HB executive chairs, Clue cantilever chair; CS1 cantilever, CS2 timber cantilever,. CS4 cantilever, CS6 lounge, Luna tub chair; Linea lounge chair, Linea side chair; Lou |
Inline Contract Furniture |
Since 1986 INLINE has been servicing and supplying architects and interior designers throughout Australia with innovative and original furniture design. |
|
|
5 |
The nominated product range by Inline Furniture contains timber components which are sourced from native forests. Operations are certified to FSC by SMARTWOOD certificate number SW-FM/COC-1148, this certificate is valid until the 18th of February 2009. |
Not applicable: product does not contain any reclaimed timber |
Yes |
Yes |
The timber used in the nominated product range is solid timber and formaldehyde is not used. |
There are no plastic components in the nominated Inline Furniture product range, this was verified during a site assessment. |
|
Yes |
Inline Furniture makes use of polyurethane foam. GECA inspected MSDS for the products to establish compliance to the requirements of this criterion. In addition GECA have received statements from their suppliers of flexible polyurethane foam. |
Yes |
This standard allows the certification of white furniture and hence does not necessarily cover the fabric that will be subject to the choice of Inline Furniture individual customers. Thus this criterion is not applicable to nominated product. |
The Inline Furniture product range under assessment does not contain glass. |
Inline Furniture use NMP 3725 adhesive in the nominated product range, this product is a certified by GECA under licence number NMP- 2004 and is therefore fully compliant with the requirements of this criterion. |
GECA inspected MSDS and technical ingredient sheets for the all substances used. These are in compliance to the requirements of this criterion. |
The substances listed in this criterion are not added to the products, this is apparent from a review of MSDS for all production ingredients and statements by various component suppliers. |
The nominated chairs and tables range by Inline Furniture are largely mechanically fixed and there is no barrier in disassembly with common industry tools, this was established by an inspection of the product range by a GECA approved assessor during a
site assessment. Assembly of all components is done in Australia. |
Yes |
|
5 |
This criterion of the standard is not applicable to the Inline Furniture range under assessment. |
N/A |
Yes |
Yes |
Yes |
Yes |
GECA have inspected a product stewardship policy by Inline Furniture, the company will take back the nominated products line and reuse components |
 |
Com-Ceil, Tri-Ceil, Therma-Ceil, Sound-Ceil, Econ-Ceil |
Ceilite |
Ceiling Lining Panel Board |
|
|
5 |
Paper sourced from Visy "Enviroliner board" is 100% recycled. Visy 100% recycled paper is now used in all products. Ceilite meets the timber requirements of this Furniture and Fittings Standard. |
|
Yes |
Yes |
The Ceilite products do not contain any formaldehyde; therefore this criterion is not applicable. |
Due to the fact that the plastic is inseparable from the cardboard, and that Ceilite has agreed to provide means of recycling through their custodianship policy (See Product Custodianship criterion below), the product is exempt for this criterion |
|
Yes |
|
Yes |
No fabric |
No glass |
The adhesives used in the Ceilite panels comply with the requirements of the GECA Standard No - 1: Adhesives. The Ceilite products subject of this report comply with the requirements of this criterion. |
GECS is satisfied that the materials used in Ceilite's products subject of this report comply with the requirements of this criterion. |
A review of all production ingredients and MSDS for all ingredients used establishes compliance with the requirements of this criterion. None of the carcinogenic substances dealt with by this criterion are used in the Ceilite products. |
The EPS polystyrene component of the product makes up at most 17% of the products' weight; therefore this criterion is not applicable. |
Yes |
GECS has reviewed a copy of Ceilite's take-back policy, and their does not seem to be any technical barrier to the prost-consumer recycling of the Ceilite products under assessment. |
0 |
|
|
Yes |
Documented installation and maintenance instructions are provided for all the products under assessment. |
Yes |
Yes |
3.2.2.2 No padding; 3.4.4 Not applicable as has no parts subject to wear |
 |
Commercial - desk tops, shelves, mobiles, cupboards, bookcases, hampers, signs and computer access flooring; Hospitality - bed heads, bedsides tables, vanities and wardrobes; also furniture for Health Care, Amusement , Education, Housing applications. |
EM Utick Pty Ltd |
Workstation, cabinets, bookshelf furniture for the commercial, hospitality, healthcare, amusement, education and housing sectors. |
|
|
5 |
GECA received AFS certificates from Forests NSW for the fiber supply used in the raw board, and are satisfied that all products under assessment meet the requirements of this criterion. |
These requirements are not applicable to the E. M. Utick product range. |
Yes |
Yes |
GECA received a AWPA certification regarding the product confirming compliance with the E1 allowable limit of 1.0 mg/lt. E. M. Utick is supplied a laminated board that the emission of formaldehyde from is drastically cut to levels well below requirements |
ABS edging is used on some of the products under assessment. It is impractical to apply a resin id code to this component therefore it is exempt from compliance with the requirements of this criterion. |
These requirements are not applicable to the E. M. Utick product range. |
Yes |
This criterion of the standard is not applicable, as no padding is used in the product line. |
Yes |
These requirements are not applicable to the E. M. Utick product range. |
This criterion of the standard is not applicable as no glass is used in the Utick product line. |
There is only one solvent based adhesive used by Utick of relevance. This adhesive function cannot be covered by a suitable water based alternative. Due to the small quantity used the product is declared as compliant. |
A review of MSDS for all production ingredients reveals none of the substances mentioned in this criterion are included in the nominated product range. |
A review of MSDS for all production ingredients reveals no carcinogenic substances are included in the nominated product range. |
There is no barrier to the disassembly of the product range, this was observed during a site assessment of the E. M. Utick product range by a GECA qualified assessor. |
Yes |
Until the Laminex board recycling program is operational EM Utick will undertake shredding of the returned product and make it available as biomass for electricity generation. This will divert waste from landfill. |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
3.2.2.1 ABS edging is used on some of the products under assessment. It is impractical to apply a resin id code to this component therefore it is exempt from compliance with the requirements of this criterion |
 |
Corporate Series Aluminium Partitioning Systems, Commercial Doors, Fire Rated Doors, Kwikloc Access Panels , Kwikloc Aluminium Ceiling Systems, Imaj Washroom Cubicles |
Studform |
Office interior partitioning system,
Doors,
Ceiling and wall cavity access panels,
Suspended ceiling system,
Washroom cubicle system |
|
|
5 |
Studform Pty Ltd source their timber products from several suppliers, GECS has confirmed all of these companies have current FSC certification. |
|
Yes |
Yes |
The test results indicate that the VOC emissions are within the allowable limits as stated for this criterion. |
|
|
Yes |
|
Yes |
|
|
Studform Pty Ltd use several adhesives to manufacture these nominated products and GECS has confirmed that the adhesives in use are compliant to the requirements of this criterion. |
|
GECS has confirmed that no hazardous or prohibited substances restricted under the corresponding criteria are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment. |
It has been demonstrated to GECS that with the exception of the fire doors these nominated products can be disassembled without the use of specialised tools or expertise. The fire doors are constructed in such a way so as to minimise the spread of fire and as a result are not made to be disassembled, see Product Custodianship. |
Yes |
GECS has confirmed that these nominated Studform Pty Ltd products are not treated or coated in any way that would prevent their post consumer recycling. |
5 |
|
|
Yes |
These nominated Studform Pty Ltd products are delivered with literature that discusses correct use, storage, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Daiken Excel-Tone MR Acoustic Ceiling Tiles |
Comprador Pacific |
|
|
|
10 |
|
|
Yes |
Yes |
|
|
|
Yes |
|
Yes |
|
|
|
Review of the materials used in the certified Comprador Pacific products has uncovered no materials listed in the corresponding criterion of the GECA 28-2006 Standard. |
None of the prohibited substances are used in the production of the Comprador Pacific ceiling tile product listed in the licence. |
|
Yes |
No treatment is applied that does not increase the useful life of the products or would prevent post consumer recycling. |
10 |
|
The ceiling tiles meet the requirements of a minimum recycled content of 50%. |
Yes |
The product information sufficiently covers correct use and recycling instructions. |
Yes |
Yes |
|
 |
Datum workstation and screen system |
Sheldon Commercial Interiors |
Workstation |
|
|
10 |
The Datum Workstation and Screen System contains 79% by weight of Vertiboard E0 sourced from Laminex - a product which is certified separately by GECA under Licence LA-2005. |
The fibre used in Laminex E0 boards has not been treated with fungicides or insecticides - as certified separately by GECA - therefore Sheldons nominated product conforms to the requirements. |
Yes |
Yes |
The formaldehyde emissions from Laminex E0 board conform to AS 1859: Part 1, Particleboard/Part 2-MDF. E0 board is certified separately by GECA - therefore Sheldons nominated product conforms to the requirements. |
During the site assessment the GECA qualified assessor recommended that appropriate use of plastic identification be initiated on small components. |
The nominated product does not contain synthetic / natural latex. |
Yes |
The nominated product does not contain polyurethane foam. |
Yes |
The nominated product does not contain fabrics. |
The nominated product does not contain glass. |
Since edge banding provides extended duration of the products usefulness and an alternative adhesive is not available currently, GECA gives an exemption to the current adhesive. |
It does not contain any listed hazardous materials. |
Material Safety Data Sheets for all substances used in the manufacturing of the workstation confirm compliance to the requirements of this criterion. |
A GECA qualified assessor observed disassembly of the nominated product during the site audit. The products are easily disassembled. |
Yes |
Coatings observed by the qualified GECA assessor during the site audit were powder coating and melamine. Sheldons nominated product meets the requirements of this criterion. |
10 |
Sheldons nominated product does not contain recycled furniture components. |
|
Yes |
Yes |
Yes |
Yes |
|
 |
Decor Ply, Decor Sorb, Decor Thane, Decor Trend, Decor Lux, Decor Slot, Decor Board, Decor Wave, Decor Bond, Decor Nex, Decor Lini |
Decor Systems |
Sound Absorption and lining panels |
|
|
|
All Decor products are timber based using a range of Plywoods, MDF and a variety of veneers. Decor Systems has committed to only using GECA certified veneers and timber board suppliers. |
|
Yes |
Yes |
The timber sources have already been verified by GECA as compliant to the requirements of this criteria. |
There are no plastic components in the products under assessment, with exception to the DecorSorb fabric which is exempt from this criterion. |
|
Yes |
|
Yes |
The fabric used by Decor Systems (DecorSorb) is compliant with these requirements. |
|
Decor Systems use a water-based adhesive. MSDS for the glue have been reviewed by GECA and have been deemed compliant. |
Paints/lacquers are obtained from their supplier, and then applied by a second company. GECA are satisfied with the operation and supplier for paints/lacquers and that this criterion is met by Decor Systems. |
GECA have assessed the painting subcontractor and found satisfactory operational procedures in compliance to this criterion. |
The products under assessment do not contain aluminium, steel, glass or plastic. This criterion is not applicable to the products under assessment. |
Yes |
Decor Systems products are coated with veneers and lacquers which substantially extend the products life. The company has committed to preferably on-selling or donating the products for re-use. |
0 |
|
|
Yes |
|
Yes |
Yes |
3.4.4 The Decor products under assessment are not subject to wear |
 |
Delta & Rexa Task Chairs, Essentia (Domino and Penta), Venice Visitors, Ola and Butterfly (Spring), Body line, Smile |
Chair Solutions |
Chairs |
|
|
5 |
|
|
Yes |
Yes |
|
All plastic components (over 100 grams in weight) of the certified chairs are marked with resin identification codes. |
|
Yes |
The Delta, Rexa, Essentia, Venice, Ola, Butterfly, Bodyline and Smile use foams which are compliant with the requirements of criterion 3.2.2.3 in GECA 28-2006. |
Yes |
Chair Solutions offer a range of fabrics for customer selection. Fully certified chairs are those which are upholstered in fabrics certified by Nordic Swan, EU Flower or which carry the Environmental Choice Australia Mark. |
|
Adhesives used by Chair Solutions are water-based and have a low VOC. Chair Solutions has discontinued the use of solvent-based glues. |
Compliance to this criterion has been established through a review of material safety data sheets (MSDS) for all production ingredients. The certification does not include chrome finishes. |
Analysis of the material safety data sheets for each of the components and substances used in the manufacture of the certified products has demonstrated that the Chair Solutions products are not made using any hazardous substances |
Chair Solutions products are easily disassembled into component parts. |
Yes |
The certified products are not coated or treated in a way which would prevent recycling. |
5 |
|
|
Yes |
The product information supplied to Chair Solutions customers includes instructions for correct use, maintenance and recycling. |
Yes |
Yes |
|
 |
Dis Office Chair, Dis Visitors Swivel Chair |
Dynamobel |
|
|
|
5 |
The nominated Dynamobel products do not contain timber and are therefore exempt from this criterion. |
N/A |
Yes |
Yes |
|
|
|
Yes |
A GECS investigation of the polyurethane padding in these products confirmed that none of the listed prohibited substances were present. |
Yes |
Dynamobel is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28-2006 |
|
These nominated Dynamobel products do not contain any adhesive and are therefore this criterion is not applicable. |
An exception to this is the use of chrome on the gas lift. Chrome is considered necessary and granted exemption in the standard for this application on the grounds of heavy physical wear. |
GECS has confirmed that Dynamobel does not use any of the listed prohibited hazardous substances as stated in the standard for this criterion. |
GECS has confirmed that the nominated Dynamobel products are separable into constituent materials without the use of specialised tools or expertise. |
Yes |
These products are not coated or treated in any way that would prevent post consumer recycling. |
10 |
These nominated Dynamobel products do not contain any recycled furniture and are therefore exempt from this criterion. |
|
Yes |
The certified products are delivered with instructions that include information for intended use, storage, care and maintenance. Stylecraft Australia, the Dynamobel dealer in Australia, accepts ownership of the certified products at their end of life. |
Yes |
Yes |
|
 |
Echo Panel |
Woven Image |
Screen system |
|
|
5 |
N/A (No Timber) |
N/A (No Timber) |
Yes |
Yes |
Low or none |
The resin identification code for the primary material Polyethylene Terepthalate (PET) is available in the product information material. The manufacturing process is such that the codes cannot be stamped |
Does not contain any latex |
Yes |
No polyurethane |
Yes |
No fabric |
No glass |
|
The certified EchoPanel products do not contain the heavy metals or other hazardous materials listed in this criterion of the GECA Furniture and Fittings Standard. |
The nominated Woven Image products do not contain carcinogens or other substances classed as prohibited in the corresponding criterion in the Furniture and Fittings Standard. |
The EchoPanel is a product made and recommended to be mechanically installed and easy to remove if necessary. |
Yes |
Yes |
5 |
|
N/A |
Yes |
The available product information provides all the required instructions for correct use, care and recycling at end of life. |
Yes |
Yes |
|
 |
Eco-Refurbished Furniture, Workgate Workstation, VSQUARE Workstation, Office Spectrum Workstation (Presence Workstation) |
Office Spectrum |
Office Workstation range |
|
|
5 (chairs), 10 (workstations) |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
|
Office Spectrum does not add any plastic components to their refurbished furniture and all other plastic components of these nominated products weigh less than 100g |
|
Yes |
|
Yes |
Office Spectrum is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28-2006 |
|
These nominated Office Spectrum furniture products use an Environmental Choice Australia certified adhesive that meets the requirements of this criterion including low VOCs and water based |
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during the manufacturing and refurbishing processes. |
It has been demonstrated that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise |
Yes |
GECS has confirmed that the nominated Office Spectrum products are not treated or coated in any way that prevents post consumer recycling |
5 |
|
|
Yes |
These nominated Office Spectrum products are delivered with literature that discusses correct use and maintenance. The product stewardship policy details end of life recycling instructions |
Yes |
Yes |
|
 |
Ecorp, Matrix, Operator, Suave, Q, Affair, Seduce, Harmony, Albany, Vibe, Keno, Voidi, Laygo, Revo, Tillo, Caleb/Fresco Ranges |
Comseat Australia |
Chairs, Lounge, Ottoman |
|
|
5 |
Comseat Australia uses timbers which are not originated from controversial source described under criterion 3.2.1.1 of GECA 28- 2006 Furniture and Fittings standard. |
|
Yes |
Yes |
Formaldehyde emissions from the products of Comseat Australia are within the limits set under criterion 3.2.1.5 of GECA 28-2006 Furniture and Fitting Standard. |
|
|
Yes |
Comseat Australia uses foams which conforms to the polyurethane padding requirements of GECA 28-2006 Furniture and Fittings Standard |
Yes |
Comseat Australia is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
|
The adhesives used by Comseat Australia have been assessed and found to be conforming to the GECA 01-2007- Adhesive Standard |
|
Comseat Australia does not use or add any of the hazardous materials or prohibited substances (including PVC) listed under criteria 3.3.1 and 3.3.2 of GECA 28-2006- Furniture and Fittings standard during the manufacturing of the nominated products. |
|
No |
The nominated Comseat Australia products are not coated or treated in a way that would prevent recycling. |
5 |
|
|
Yes |
|
Yes |
Yes |
|
 |
Eko, Breathe, Rialto, Status, Orbit, Temo, Focus, and Sphere Chairs |
Advanta |
|
|
|
5 |
Advanta has provided chain of custody documentation for all of their timber sources. |
|
Yes |
Yes |
The timber sources emit less than the limit set for formaldehyde emissions. |
Resin Identification codes are stamped on plastic components over 100g. |
|
No |
No banned additives are used during production. Organic tin catalysts are not evident in the polyurethane padding material used for the production of the nominated chairs. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
|
A water based low VOC adhesive is used to manufacture the certified Advanta products. The adhesive does not contain any hazardous substance s as classified under the hazardous materials criterion. |
A GECS review of the materials used in the certified Advanta products has uncovered no hazardous materials listed for this criterion. |
None of the listed prohibited substances are used in the manufacture of the certified Advanta products. |
Advanta has demonstrated that the products are sufficiently separable into constituent materials without the use of specialised tools or expertise. |
Yes |
These products are not coated or treated in any way that would prevent post consumer recycling. |
5 |
|
|
Yes |
The product information sufficiently covers correct use and recycling instructions. |
Yes |
Yes |
|
 |
EN Systems Furniture, SLO & SLY & SLH Desking System, CK8 & CK9 Filing & Storage |
Posh Office Systems |
Workstation, Desking Systems, Filing and Storage Cabinets |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
The test results indicate that the formaldehyde emissions are within the allowable limits as stated for this criterion. |
GECS has confirmed that all plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code. |
|
Yes |
GECS has confirmed that no banned additives are used during the production of the Polyurethane padding contained in some of these nominated products. |
Yes |
|
GECS has confirmed that the glass used in some of these nominated products is tempered glass that does not contain any banned additives as stated for this criterion. |
A water based low VOC adhesive is used to manufacture these certified products. The adhesive does not contain any hazardous substances restricted in the standard. |
|
GECS has confirmed that no restricted hazardous or prohibited substances are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment. |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated POSH Office Systems (HK) Ltd products are not treated or coated in any way that would prevent their post consumer recycling |
5 |
|
|
Yes |
These nominated POSH Office Systems (HK) Ltd products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
These POSH Office Systems (HK) Ltd products are transported with recyclable cardboard boxes, plastic bags and plastic cornering. The plastic is not halogenated and may be recycled in mainstream resource recovery facilities. |
 |
Epicentre and RTculate Workstation, TokTok Table |
RJ Concept |
|
|
|
10 |
Timber-derived components used in the manufacture of the certified products are certified under the Environmental Choice Australia (ECA) Mark. |
|
Yes |
Yes |
|
RJ Workspace use resin codes on all the plastics components to indicate the method of recycling for the particular plastic to the end recycler. |
|
Yes |
The padding consists of flexible polyurethane foam that is currently certified under the ECA Mark. |
Yes |
Any upholstered components will use ECA certified fabrics to produce fully-certified products. |
|
Adhesives used to manufacture the products are water based, with low Volatile Organic Compounds. |
RJ Workspace utilise chemicals in the manufacturing of their products that contain no harmful chemicals according to this criterion |
RJ Workspace utilise chemicals in the manufacturing of their products that contain no prohibited chemicals according to this criterion |
The products components are easily separated to ensure ease of disassembly. |
Yes |
RJ Workspace use a powder coat on the steel frame used to manufacture their products. The powder coat does not inhibit post consumer recycling. |
10 |
|
|
Yes |
RJ Workspace supplies a Care and Maintenance Manual for RJ Workspace Products. The manual is supplied to the consumer on sale of the product. The manual outlines the procedures for care and maintenance to ensure longer lasting life of product. The Warranty terms and conditions and take back policy are also outlined in the Care and Maintenance Manual. |
Yes |
Yes |
|
 |
Ergosystem Lilypod Workstation and Partition System |
Ergosystem Commercial Interiors |
Workstations and partitions |
|
|
5 |
Ergosystem Commercial Interiors source all MDF (18mm and 25mm) product from the Laminex Group. The MDF range of the Laminex Group has already been certified to the Good Environmental Choice declaration and holds GECA Licence No: LAM 2005 |
N/A (No reclaimed timber) |
Yes |
Yes |
Ergosystem Commercial interiors source all MDF (18mm and 25mm) product from the Laminex Group. The MDF range of the Laminex Group has already been certified to the Good Environmental Choice declaration and holds GECA Licence No: LAM 2005 |
The plastic components of the workstation are feet covers and ABS edging. In the case of the feet covers they are less then 100g in weight and therefore exempt from meeting the requirements of this criterion, in the case of the edging it is impractical |
No synthetic or natural latex |
Yes |
No polyurethane padding |
Yes |
No fabrics |
No glass |
An EVA based adhesive is used when applying ABS edging on MDF panels. A review of MSDS and technical review of BAZ 3000, finds this adhesive to be in compliance to the requirements of this criterion. |
A review of MSDS for Dulux 961 line Alphatec Plus Polyester Powder Coatings and 272 Duralloy finds that none of the above prohibited substances are contained in the ingredient mix |
Not Used |
There is no technical barrier to the disassembly of Lilypod Design Pty Ltd furniture products range for further recovery and recycling. Assembly and disassembly of the product is relatively straight forward and the manufacturer has made a commitment to the recovery and re-use of the product range. |
Yes |
Yes |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
3.2.2.1 Feet covers not over 100g, edging impractical to apply a label |
 |
Expotechnik Exhibition System Environmental Choice Option |
Expo Solutions |
Exhibition stand |
|
|
|
The Expotechnik exhibition system is only certified when, if used, timber components are certified under the Environmental Choice Australia Mark |
|
Yes |
Yes |
|
Plastic components of this exhibition system with a mass of 100g or more are labeled with the appropriate resin identification codes. |
|
Yes |
The Expotechnik exhibition system is only certified when padding components greater than 10% by weight are certified under the Environmental Choice Australia Mark. |
Yes |
The manufacturer has acknowledged and the licence conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
The Expotechnik exhibition system is only certified when, if used, glass components are not treated or impregnated in any way contrary to the requirements of this criterion. |
Expo Solutions Pty Ltd use a water based, low VOC adhesive that meets the requirements of this criterion. |
Yes |
GECS has confirmed that no hazardous or prohibited substances are added or used in the manufacturing of this exhibition system. |
GECS has confirmed that this exhibition system is easily disassembled into its constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that no coatings or treatments are applied to this product that will prevent its post consumer recycling. |
5 |
|
|
Yes |
Expo Solutions Pty Ltd provides product information to the customer, how ever trained staff are responsible for the maintenance of the exhibition system for the duration of the rental. |
Yes |
Yes |
|
 |
F2, F3, and F5 Workstation |
Australian Workstation Manufacturers |
Office Furniture |
|
|
10 |
The F2, F3 and F5 workstations are manufactured using Environmental Choice Australia Eco-label certified processed wood products. |
|
Yes |
Yes |
These products have been tested to AS/NZS 4266.16.2004 standards which show that the formaldehyde emissions from the wood based components are well below the allowable limit. |
These AWM products have been assessed against the requirements of this criterion and it has been concluded that these products meet the requirements in the GECA Furniture and Fittings Standard. |
These nominated products contain no padding materials. |
Yes |
No latex or Polyurethane padding is used in the manufacturing of these products. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
Australian Workstation Manufacturers use toughened glass in these certified products, which does not use non-conforming treatments listed in this criterion in the standard. |
This manufacturer uses a water based adhesive that is low in VOC?s. This adhesive conforms to the relevant requirements of the GECA Adhesives Standard. |
|
GECS has confirmed that AWM does not use any of the listed prohibited or hazardous substances as stated in the standard for this criterion. |
GECS has confirmed that these AWM products are separable into constituent materials without the use of specialised tools or expertise. |
Yes |
These products are not coated or treated in any way that would prevent post consumer recycling. |
10 |
|
|
Yes |
Technical data sheets and information regarding the intended use of these products in association with the product custodianship policy confirms AWM satisfies the requirements of this criterion. |
Yes |
Yes |
|
 |
Filing Cabinets, Cupboards, Mobile Pedestals, Storage Lockers, Library Shelving |
Pro-File Commercial Furniture |
|
|
|
5 |
|
|
Yes |
Yes |
|
The ABS and PP tambour door slats are marked with the relevant resin identification codes |
|
Yes |
|
Yes |
|
|
|
The substances listed under Overall Loads are not intentionally added to the certified Pro-file Commercial Furniture products during manufacture |
The substances listed under Prohibited Substances are not added to the certified products or used as auxiliary chemicals during manufacture |
The products are separable into constituent materials for recycling. |
Yes |
No coatings or treatments are used that restrict post consumer recycling |
5 |
|
|
Yes |
The product information available to end users of the nominated products contain sufficient details regarding instructions for correct use and maintenance while the product custodianship document provides directions for recycling at end of life. |
Yes |
Yes |
|
 |
Filing Cabinets, Stationary Cupboards, Mobile Pedestals, Tambour Cupboards, Storage Lockers, Library Shelving |
Access Office Industries |
|
|
|
5 |
|
|
Yes |
Yes |
|
The ABS and PP tambour door slats are marked with the relevant resin identification codes. All other plastic parts are under the 100g limit and not applicable under this criterion. |
|
Yes |
|
Yes |
|
|
|
The substances listed under Overall Loads are not intentionally added to the certified Access Office Industries products during manufacture. |
|
The products are separable into constituent materials for recycling. |
Yes |
No coatings or treatments are used that restrict post consumer recycling. |
5 |
|
|
Yes |
The product information available to end users of the nominated products contain sufficient details regarding instructions for correct use and maintenance while the product custodianship document provides directions for recycling at end of life. |
Yes |
Yes |
|
 |
Folio, Alfa, Clue, Rise, Ayre, Soho & Pacific Seating. Boardroom table, Bookcases, Corner units and Storage systems. 70mm Tile, 50mm Tile & 35mm Tile Partitions. 25mm & 32mm Sustainable Solutions Workstations |
Commercial Solutions Australia (CSA) |
Workstations, Partitions, Loose Furniture, Seating |
|
|
5 |
The timber used in the CSA products is sourced from sustainably managed forest operations and the chain of custody is managed and documented appropriately. |
|
Yes |
Yes |
The timber materials used by CSA Pty Ltd in the certified products are sourced from a company already certified under the Environmental Choice Australia Mark. The timber components do not exceed the limit set for formaldehyde emissions in this criterion. |
Plastic components from the Sustainable Solutions range above 100g are marked with the relevant resin identification codes. |
|
Yes |
Foam padding used in certified Sustainable Solutions range is already certified under the Environmental Choice Australia Mark, and therefore meet the requirements of the GECA Furniture and Fittings Standard. |
Yes |
CSA Pty Ltd source fabrics certified under the Environmental Choice Australia Mark. CSA Pty Ltd has confirmed that the certified range will feature only textiles certified under the Environmental Choice Australia Mark. |
Glass used by CSA Pty Ltd in the certified Sustainable Solutions range is a clear float glass. It has been confirmed that the glass is not treated or impregnated in a manner that does not conform to this criterion. |
The adhesive used in the certified Sustainable Solutions range of furniture is a hot-melt product used for edgebanding that is acceptable according to the requirements of the GECA Adhesives Standard. |
|
A review of the material flows for the manufacture of the certified Sustainable Solutions range of furniture revealed items of non-conformance regarding hazardous materials use. CSA Pty Ltd has indicated these substances will no longer be used. |
The CSA Pty Ltd certified Sustainable Solutions range of furniture is easily disassembled into constituent materials without the aid of specialised tools or expertise. |
Yes |
No coatings or treatments are used that would interfere with the post consumer recycling of the certified products. |
5 |
|
|
Yes |
The warranty documentation states the correct use and maintenance for the certified products and disposal options for the customer at product end of life. The point of sale documentation contains information sufficient to satisfy the requirements of this criterion. |
Yes |
Yes |
|
 |
Freeway, Ozone, Exe, Sintesi, Metzo |
Bevisco Commercial Interiors |
Workstations |
|
|
10 |
Bevisco Commercial Interiors source their timber products from an Environmental Choice Australia certified supplier. GECS can confirm the timber products contained in these nominated products meet the requirements of this criterion. |
|
Yes |
Yes |
The wood products contained in these nominated Bevisco Commercial Interiors products have been tested for their volatile organic compound emissions. The test results indicate that the VOC emissions are within the allowable limits. |
GECS has confirmed that all plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code. |
|
Yes |
GECS has confirmed that no banned additives are used during the production of the Polyurethane foam contained in some of these nominated products. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
|
GECS has confirmed that the adhesive used on these certified products has a solvent content of less than 0.3% and meet the relevant requirements of the standard. |
GECS has confirmed that no hazardous or prohibited substances listed in the corresponding criteria are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment. |
|
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Bevisco Commercial Interiors products are not treated or coated in any way that would prevent post consumer recycling. |
10 |
|
|
Yes |
The nominated Bevisco Commercial Interiors products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Frost , Sandrift, Brio, Fresco ClimaPlus. Eclipse, Millennia ClimaPlus. Radar High NRC, Radar High CAC, Olympia Micro ClimaPlus |
USG |
acoustic ceiling tiles |
|
|
15 |
The certified USG Australasia products contain materials that conform to the requirements of this criterion. The material requirements are subject to periodic review, the manufacturer has committed to providing feedback when changes are made. |
|
Yes |
Yes |
The test reports provided indicate the certified USG Australasia ceiling tile products have low or nil VOC emissions. The products are also rated according to the US LEED as low to zero VOC content. |
|
|
Yes |
|
Yes |
|
The product contains a material that is not treated or impregnated in any manner that is contrary to the requirements of this criterion. |
The adhesive used in the USG Australasia products certified under the USG-2-2008 licence contains very low hazardous materials and meets the relevant requirements of the GECA Adhesives Standard. |
Certified USG ceiling tile products do not contain prohibited materials or exposure pathways to very low hazardous materials content do not exist due to being bound in the physical matrix during production. |
|
There is no technical barrier to the disassembly of the USG products covered under the USG-2-2008 licence. |
Yes |
No Coatings that would prevent post consumer recycling are applied to the Certified USG ClimaPlus products, contained in the ranges assessed according to the GECA 28-2006 Furniture and Fittings Standard |
15 |
|
The formulation of the certified USG Australasia ceiling tile products indicates that the recycled content is over 50% |
Yes |
The product information available contains details for the intended use, instructions for use and maintenance, and also recycling instructions for end of life. |
Yes |
Yes |
The shrink wrap used is Polyethylene no hazardous materials are listed in the composition information. All packaging is recoverable in mainstream recycling facilities. |
 |
Fusion (excludes softboard component) Screen System, Alpine: Desk, Return, Workstation, table, storage furniture |
Workspace Commercial Furniture |
|
|
|
10 |
Workspace Commercial Furniture uses timber certified under the Environmental Choice Australia Eco-Label |
|
Yes |
Yes |
|
|
|
Yes |
|
Yes |
|
|
The adhesives have been assessed and found to be conforming to the GECA 01-2007- Adhesive Standard |
|
Workspace Commercial Furniture does not use or add any of the hazardous materials or prohibited substances (including PVC) |
|
Yes |
The nominated Workspace Commercial Furniture products are not coated or treated in a way that would prevent recycling |
10 |
|
|
Yes |
|
Yes |
Yes |
|
 |
Galaxy, Squadron, Centurion Storage Range |
Bosco Storage Solutions |
Tambour Door Cabinets |
|
|
5 |
|
This range of nominated Bosco storage products contains no wood and is therefore exempt from this criterion. |
Yes |
Yes |
|
The door slats in these products are made from a recyclable high impact plastic. These slats are marked with the appropriate resin identification code to assist in end of life recycling. |
|
Yes |
This range of nominated Bosco storage products contains no padding material and is therefore exempt from this criterion. |
Yes |
This range of nominated Bosco storage products contains no fabrics and is therefore exempt from this criterion. |
This range of nominated Bosco storage products contains no glass and is therefore exempt from this criterion. |
Bosco uses a compliant adhesive that is low in VOCs and does not contain any of the listed hazardous substances as stated in the standard. |
GECS has confirmed that Bosco does not use any of the listed hazardous substances as stated in the standard for this criterion. |
GECS has confirmed that Bosco does not use any of the listed prohibited substances as stated in the standard for this criterion. |
GECS has confirmed that these Bosco products are separable into constituent materials without the use of specialized tools or expertise. |
Yes |
The certified Bosco products are not coated or treated in any way that would prevent post consumer recycling. |
5 |
Bosco has given no indication that they wish to on-sell second hand furniture as certified, this criterion is therefore not applicable. |
|
Yes |
The certified Bosco products are delivered with an operation and maintenance manual that comprehensively covers the requirements for this criterion. |
Yes |
Yes |
|
 |
GECA_Breathe, GECA_EnE, GECA_Individual Dynamics (I.D) |
Diami Australia Pty Ltd |
Office and Task Chairs
|
|
|
5 |
Diami sources its timber from a FSC approved supplier meeting the requirements of this criterion. |
Diami does not use any recycled or reclaimed timbers in its products. |
Yes |
Yes |
The formaldehyde test reports provided by Diami demonstrate that the processed wood components of these products do not exceed the limits for formaldehyde emissions as described in the standards for this criterion. |
All plastic components of this furniture weighing above 100g are labeled with resin identification codes. Diami is compliant with this criterion. |
No latex is used in the manufacturing of these products; Diami is compliant with this criterion. |
Yes |
The foam used in these products does not contain any of the listed hazardous substances as described in the furniture and fittings standard. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
No glass is used the nominated Diami products. |
Diami uses a water based low VOC adhesive, this product has been investigated by GECS and found to be compliant with the requirements of this criterion. |
GECS can confirm that based on the evidence provided, none of the listed hazardous materials are contained in any of these Diami products. |
Apart from an exempt small component subject to heavy physical wear GECS can confirm that based on the evidence provided no other prohibited substances are contained in or used for the manufacture of these Diami products. |
GECS is advised that disassembly instructions are available upon request for all the nominated products. |
Yes |
These products are not coated or treated in any way that would prevent post consumer recycling. |
7 |
No recycled furniture is used in the manufacturing of these nominated products. |
|
Yes |
The product information consumers are provided with discusses warranty terms, instructions for use, care, storage, maintenance and end of life recycling. |
Yes |
Yes |
|
 |
Gryphon MK1, MK3, Executive, Maxi Adjustable arms |
Arteil |
Seating |
|
|
5 |
Arteil?s timber supplier has provided a current AFS certificate, indicating that the wood used is not from a controversial source. |
|
Yes |
Yes |
The timber sourced for use in the certified Arteil products emit less than the limit set for formaldehyde emissions. |
Resin Identification codes are stamped on plastic components over 100g. |
|
Yes |
These nominated products use foams that comply with the requirements of this criterion in the GECA Furniture and Fittings Standard. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
|
The adhesives used in the nominated products are low VOC and compliant with the requirements of the Adhesives criterion in the GECA Furniture and Fittings Standard. |
A review of the production ingredients used in the manufacture of the products under assessment shows that none of the listed hazardous substances are used. |
None of the listed prohibited substances are used in the manufacture of the certified products. Optional chromium components are not certified. |
Arteil have demonstrated that there is no barrier to separation into constituent materials for recycling. |
Yes |
No treatment is applied to the certified Arteil products that prevents post consumer recycling. |
5 |
|
|
Yes |
The product labels and information available on the website confirm that the product information available for the nominated products satisfy this criterion. |
Yes |
Yes |
|
 |
High Resilience foam range: Ultimate Comfort, Ultimate Comfort Commercial, Regal Comfort. Low Resilience foam range: Indulgence Comfort, Indulgence Plus. |
Joyce Foam Products |
Joyce Foam Products manufactures the largest range of
polyurethane foam products in Australia. Joyce foam is used in a
diverse range of products from consumer goods to industrial
applications.
|
|
|
5 |
The natural fiber materials used in foam manufacturing by Joyce Foam Products originate from certified plantations. |
|
Yes |
Yes |
|
|
|
Yes |
None of the of the substances restricted by this criterion are used in the certified products. Joyce Foam Products use a specialised waste removal disposal management company. |
Yes |
|
|
|
Yes |
A review of MSDS for all production ingredients reveals none of the substances mentioned in this criterion are included in the nominated product range. |
The Joyce Foam Products range under assessment are single unit pieces within the furniture item. As such they cannot be separated; rather they are separated from the final furniture product. |
Yes |
Joyce Foam Products will generally accept returned products. Where there are health issues associated with used foam, Joyce may chose to reject returned material based on health legislations, health practices and production practicalities. |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
|
 |
Highway, Alupro, Barcelona Desks. Como Desking Systems, N_Table, Freestyle Screens. Linea / M Series Task Chair and Visitor Chair Range, Burg Series Seating Task/Executive/Reception Chair Range, Davis Visitor Chair Range, Flextable, Multiplex Storage |
Burgtec |
Desks, Tables, Screens, Chairs, Storage |
|
|
5 |
GECS has received evidence of the timber supply chain and species of the timbers used in the production. The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
Burgtec has stated in the environmental policy and Environmental Assurance has confirmed that the company sources processed timber components from previously certified suppliers that meet the requirements of this criterion. |
These nominated Burgtec products do not contain any plastic components that have a mass of over 100g and therefore this criterion is not applicable. |
|
Yes |
These nominated Burgtec products do not contain any padding material and therefore are not applicable under this criterion. |
Yes |
Burgtec is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet the requirements of GECA 28 |
One of the nominated Burgtec products contains thermally toughened glass which does not contain any prohibited chemicals, colouring agents or additives. |
Burgtec uses compliant adhesives that are low in VOCs and do not contain any of the listed hazardous substances as stated in the standard. |
GECS has confirmed that Burgtec does not use any of the listed hazardous or prohibited substances as stated in this section of the GECA 28-2006 Furniture and Fittings standard. |
|
GECS has confirmed that these Burtec products are separable into constituent materials without the use of specialized tools or expertise in conformance with this criterion. |
Yes |
The certified Burgtec products are not coated or treated in any way that would prevent post consumer recycling. |
5 |
|
|
Yes |
Burgtec supplies customers with product information clearly stating instructions for correct use, maintenance and recycling. |
Yes |
Yes |
|
 |
Hufcor Operational Wall Systems - Classic Series 8000, Pathfinder Series 5000. Kyissa Flo-Line Washroom Cubicals, K1, K2, K3, Kyissa K4 Toilet Cubical |
Hufcor Group and Kyissa Pty Ltd (Subsidiary) |
Partitioning and toilet cubicles |
|
|
5 |
The timber materials used in the Hufcor Group and Kyissa Pty Ltd certified products are sourced from suppliers who are either already certified under the Environmental Choice Australia Mark or who have PEFC / FSC certified chain of custody in place. |
|
Yes |
Yes |
Only E0 Particleboard, standard MDF or laminated and edged E1 particleboard can be specified for certified products. |
Only ABS edging can be used in certified products. |
|
Yes |
|
Yes |
Only fabrics already certified under the Environmental Choice Australia Mark can be specified for certified products. |
|
The adhesives used in the Hufcor Group and Kyissa Pty Ltd (subsidiary) certified products are low VOC and conform to the requirements of this criterion in the standard. |
PVC edging, brass and chrome fittings cannot be specified in certified products. |
|
It was established during a site inspection that the certified products are easily disassembled. |
Yes |
Hufcor Group and Kyissa Pty Ltd certified products are not coated or impregnated in any way that would prevent post consumer recycling. Except where the treatment (lacquer, powdercoat, etc.) is applied in order to further extend the useful life |
5 |
|
|
Yes |
The Warranty and Maintenance manual for certified Hufcor Operable Walls and Kyissa Washroom Cubicles contains sufficient information to satisfy the requirements of this criterion in the standard. |
Yes |
Yes |
|
 |
Interior workspace solutions |
Kinnarps |
Tables/Desks, Workstations, Partitions/Screens, Task Chairs, Pedestals and Storage, Screen Panels, Coffee Tables |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
GECS has received air emissions test reports. The results show that the emission meet the limit requirement stated in this criterion. |
There are resin code labels on all plastic components over 100 grams. |
|
Yes |
GECS has confirmed that the padding does not use any organic tin catalysts, additives, blowing agents that are restricted according to the criterion in the standard. |
Yes |
Kinnarps is upholstering its furniture and fittings in only GECA certified fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28-2006 |
|
The adhesives used for the certified Kinnarps workstations are low VOC and do not contain hazardous materials restricted by the GECA Adhesives Standard. |
|
GECS has confirmed that no hazardous or prohibited substances are used in the production. |
The nominated products are easily disassembled into constituent materials without the use of specialised tools for end of life for recycling as required in the standard. |
Yes |
GECS has confirmed that no coatings or treatments are used on these products that would prevent their post consumer recycling. |
5 |
|
|
Yes |
The product information provided at point of sale describes the instructions for use, care and recycling at end of product life satisfying the requirements of this criterion. |
Yes |
Yes |
|
 |
Izaak, Molly G, Miles G, Elliot G, and Rocopol chair ranges |
Schamburg+Alvisse |
Chairs |
|
|
5 |
All timber is sourced from eco-friendly certified forests |
There are no salvage or Reclaimed timbers in the Schamburg + Alvisse products under assessment. |
Yes |
Yes |
Schamburg and Alvisse products are tested by Cetec for volatile organic compound emission. Products containing Recopol recycled resin have been tested and have an emission rate of <0.02 mg/M2/hr (7 days) |
The Molly G, Miles G and Elliot G chairs do not contain any plastic components larger than 100 grams. All plastic components on the Izaak and Recopol chairs weighing greater than 100g have resin codes. |
|
Yes |
|
Yes |
Schamburg + Alvisse offers the Izaak, Molly G, Elliot G, Miles G and Reopol Chairs in a range of GECA certified fabrics, EU Flower certified fabrics, Nordic Swan certified fabrics as well as any customer specified fabrics. |
|
|
None of these substances are added to the chairs from the Izaak, Molly G, Elliot G, Miles G or Regopol ranges of chairs under assessment. The plastic is polypropylene which is recyclable in many centres around Australia. |
None of these prohibited substances are used in the manufacture of the Izaak, Molly G, Elliot G, Miles G and Regopol ranges of chairs under assessment. The only major components are plywood, metals, polypropylene and ABS which are recyclable. |
There is no technical barrier to the disassembly of the Izaak, Molly G, Elliot G, Miles G and Regopol ranges of chairs under assessment. They are mechanically fixed with nuts and bolts and can be easily disassembled for post-consumer use or recycling. This has been verified during a site assessment of the assembly plant. |
Yes |
No coating or treatment that will prevent recycling is applied to the Schamburg + Alvisse chairs. |
5 |
This criterion of the standard is not applicable to Schamburg + Alvisse nominated products. |
This criterion of the standard is not applicable to Schamburg + Alvisse nominated products. |
Yes |
Product information is available for the Izaak, Molly G, Elliot G, Miles G and Regopol ranges of chairs. GECS has reviewed maintenance instructions and a product stewardship policy document in accordance with the requirements of this criterion. The intended use of the product is self-evident. |
Yes |
Yes |
|
 |
Jackie and Kate Medium and High Back Range, GC Lounge range |
Chairmans Rest |
|
|
|
5 |
Timbers used in the nominated products do not originate from controversial sources |
|
Yes |
Yes |
The formaldehyde emissions from wood are less than 3.5 mg/m2h. Thus, the nominated products meet the requirements of this criterion |
GECS has confirmed that the plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code |
|
Yes |
|
Yes |
Chairmans Rest is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed and found to not compromise the ability of the furniture and fittings to meet the requirements of GECA 28 |
|
|
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Chairmans Rest products are not treated or coated in any way that would prevent their post consumer recycling |
5 |
|
|
Yes |
These nominated Chairmans Rest products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Joy 01 Swivel Task Chair, Joy 02 Swivel Task Armchair, Joy 03 Counter Chair, Joy 05 Visitor Chair, Joy 06 Visitor Armchair |
Ensson |
|
|
|
7 |
|
|
Yes |
Yes |
|
GECS has confirmed that all plastic components, weighing over 100g, are marked with the appropriate resin identification code for post consumer recycling. |
|
Yes |
GECS has confirmed that no prohibited substances, as stated for this criterion, are present or used in the manufacturing of the padding of these nominated products. |
Yes |
Ensson is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28-2006 |
|
The adhesive used in these nominated Ensson Pty Ltd products has been found to have a low volatile organic component and meets the requirements of this criterion. |
|
GECS has confirmed that hazardous or prohibited substances are not added or used in the manufacturing of these nominated products including the cleaning of manufacturing equipment. |
It has been demonstrated that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Ensson Pty Ltd products are not treated or coated in any way that prevents post consumer recycling. |
7 |
|
|
Yes |
These nominated Ensson Pty Ltd products are delivered with literature that discusses correct use, maintenance and cleaning. The product stewardship policy details end of life recycling instructions. |
Yes |
Yes |
|
 |
KK Series Workstation, S133 Chair |
Maxton Fox |
|
|
|
5 |
Maxton Fox source wood panels that are currently GECA approved products. |
|
Yes |
Yes |
The processed wood panels are currently GECA approved products and thus conformance to the relevant sections in the Standard has already been established. |
There are resin code labels on all plastic components over 100 grams. |
|
Yes |
GECS has confirmed that the padding does not use any organic tin catalysts, additives, blowing agents that are restricted according to the criterion in the standard. |
Yes |
Maxton Fox is upholstering its furniture and fittings in only GECA certified fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet the requirements of the GECA 28 (Furnitu |
|
The adhesives used for the certified Maxton Fox Furniture Systems workstations are low VOC and do not contain hazardous materials restricted by the GECA Adhesives Standard. |
|
GECS has confirmed that no hazardous or prohibited substances are used in the production. |
The nominated products are easily disassembled into constituent materials without the use of specialised tools for end of life for recycling as required in the standard. |
Yes |
GECS has confirmed that no coatings or treatments are used on these products that would prevent their post consumer recycling. |
5 |
|
|
Yes |
The product information provided at point of sale describes the instructions for use, care and recycling at end of product life satisfying the requirements of this criterion. |
Yes |
Yes |
Maxton Fox Furniture Systems have already established a product stewardship policy. Maxton Fox Furniture Systems are committed to taking back end of life products from customers for recycling. |
 |
Leaf, Catifa 53, Catifa 46, Duna, Palm |
Arper |
Chairs |
|
|
5 |
The nominated products do not contain timber and therefore this criterion is not applicable. |
|
Yes |
Yes |
|
Resin identification codes are clearly printed on the plastic components that weigh over 100g in the nominated products. |
|
Yes |
GECS has confirmed that no prohibited or restricted substances are added or used during the manufacturing of these products. |
No |
The nominated products that Arper s.p.a. have submitted do not contain fabric and therefore this criterion is not applicable. |
|
No adhesives are used in the construction of these nominated products and therefore this criterion is not applicable. |
Gecs has confirmed that no hazardous substances are added or used in the manufacturing of these nominated products that are above the limits given in Annex II of the Decision 2005/673/EC of September 20th (amending Annex II of Directive 2000/53/EC). |
No prohibited substances were found to be present in these products. |
It has been confirmed that these nominated Arper s.p.a. products are able to be disassembled into their constituent components with out the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these certified Arper s.p.a. products are not coated or treated in any way that would prevent post consumer recycling. |
5 |
|
|
Yes |
These products are delivered with product information that covers correct use and maintenance. The product custodianship policy deals with recycling instructions sufficiently. |
Yes |
Yes |
|
 |
Linea, Alti, Summit and Float Workstations |
Baseline Commercial Furniture Pty Ltd |
Flexible Workstations |
|
|
10 |
Baseline uses wood materials certified under the Environmental Choice Australia Eco- Label for the manufacturing of the nominated workstations. |
|
Yes |
Yes |
|
|
|
Yes |
Baseline does not use latex in the nominated products. Where specified polyurethane padding sourced is certified under the Environmental Choice Australia Eco-Label. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
Baseline can use only clear float glass when specified in certified furniture. |
The adhesives used by Baseline are compliant with the relevant requirements of the GECA Standards, which include the requirements for a low VOC content. |
|
It has been verified that Baseline does not use or add any of the listed hazardous materials or prohibited substances during the manufacturing of the nominated products. |
|
Yes |
Baseline products can be disassembled without specialized tools or expertise to facilitate the recovery of the constituent materials for recycling. |
10 |
|
|
Yes |
The certified Baseline Commercial Furniture products come with sufficient product information regarding cleaning, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Liquid Workstation Range,Neotec Task Chair,Task Air Partition,Zodiac Workstation Screen,SyMetrix Desk Solution,Transform Desk,Divide Screen with MDF, Echopanel, Clear Acrylic Panel,Taper |
UCI |
Workstation and storage system
Chair
Screen system
Office Furniture
|
|
|
5 |
The panel board product lines are sourced from a certified supplier confirming that the fiber is sourced from managed plantations and by-products from sawmilling operations of plantation forests. |
|
Yes |
Yes |
The panel board product lines are sourced from a certified supplier confirming that their emissions are well below the cut off limit specified under this criterion of the Standard. |
There are resin codes labeled on all plastic parts weighing over 100g. The acrylic panel is not required to have the code imprinted on it due to implications regarding the manufacturing process. |
GECS has confirmed that the nominated products of UCI Manufacturing do not contain any latex and therefore this criterion is not applicable. |
Yes |
UCI Manufacturing nominated products use foams sourced companies that are certified to GECA standards. |
Yes |
This certification only certifies the white furniture and does not cover the fabric that will be subject to the choice of individual customers. |
There is no glass in these UCI nominated products and therefore this criterion is not applicable. |
The adhesives used in the certified UCI products have low VOC and conform to the GECA Adhesives Standard. |
A review of the production ingredients used in the manufacture of the products under assessment shows that none of the listed hazardous substances are used. |
A review of the production ingredients used in the manufacture of the products under assessment shows that none of the listed hazardous substances are used. |
A GECS certified assessor has undertaken an inspection of the products and found that there is no barrier to separation for recycling. |
Yes |
The nominated products are not treated or coated in a manner which would prevent recycling. |
0 |
This criterion is not applicable to the nominated products. |
|
Yes |
UCI has released product information for the certified products range that indicates correct use, care and recycling at the end of product life. |
Yes |
Yes |
|
 |
Lounge Products (Felix etc), Other Chair Products (Cate Plywood Chair etc) |
Schamburg+Alvisse |
|
|
|
5 |
Schamburg + Alvisse use a range of timber components in the nominated products, the timber supply chain and document tracking has been assessed and found to be in conformance with the standard. |
|
Yes |
Yes |
The engineered wood products have low formaldehyde emissions that meet the requirements of the corresponding criterion in the standard. |
|
|
Yes |
The Schamburg + Alvisse products subject of this report contain padding products certified under the Environmental Choice Australia Eco-Label. |
Yes |
Schamburg + Alvisse is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
|
Adhesives have been established as conforming to the criterion in the standard and are available to the contract manufacturers/suppliers of Schamburg + Alvisse. |
Chrome finishes are not permitted in certified products except for gas lifts. |
The applicant acknowledges and the report recommendation stipulates that only materials found to be conforming to the requirements of the standard can be used in certified products. |
The products are separable according to the corresponding requirements in the standard. |
Yes |
No coatings or treatments are used that would prevent post consumer recycling where able. |
5 |
|
|
Yes |
The Schamburg + Alvisse product maintenance guide provides end users with details regarding instructions for correct use and maintenance. The product take-back policy serves as recycling instructions. |
Yes |
Yes |
|
 |
Lumicor R4, Ecotop |
Baresque |
Architectural resin wall panels and Bio-composite surface material |
|
|
5 |
The paper content in the Ecotop product is made from recycled paper which has FSC certification. This criterion is not applicable to Lumicor R4. |
|
Yes |
Yes |
|
The relevant resin identification code is clearly marked on the Lumicor R4 panels. This criterion is not applicable to Ecotop. |
|
Yes |
|
Yes |
|
|
|
Yes |
No hazardous materials restricted by this section in the standard exist in the final products or in the production of these products. |
BAF have in place a recycling process associated with their product stewardship policy. There is no barrier to disassemble these products for recycling, separation into constituent materials is not required as the products are homogenous. |
Yes |
|
5 |
|
|
Yes |
The product information consumers are provided with discusses warranty terms, instructions for use, care, maintenance and end of life recycling. |
Yes |
Yes |
|
 |
Maudan Table, AC Table, Upholstered Cube, Cafe Chair, Cafe/Meeting table, Quadrant, Bench, Polska Stool, Prism, Highgate Sofa/Ottoman, Block Sofa, Classic Sofa/Ottoman, Extra Low Sofa, 103 Sofa/Ottoman, Slab Ottoman, Sled Base Bench, Barstool, Polycube |
Koskela |
Other Products Also Certified: Patonga Table, Low Table, Frantz Chair, Timber Block, Pebble Table, Bed, Sled Base Table |
|
|
10 |
Timber and timber derived materials used in these nominated products are sourced from sustainable timber suppliers. |
Koskela's products do include salvaged or reclaimed timber. GECS has reviewed a statement from the supplier, which confirms that they do not use any of the prohibited hazardous substances listed in the GECA 28-2006 - Furniture and Fittings. |
Yes |
Yes |
A range of specific air emission tests have been provided for the verification process for both raw timber materials and finished products of the nominated range, demonstrating compliance. |
All the plastic components of these nominated products weighing more than 100 grams are marked with appropriate resin identification codes. |
|
Yes |
|
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only white furniture has been certified. However Koskela Pty Ltd has the capacity to source textiles certified as compliant to the Environmental Choice Australia Mark |
|
These nominated products are manufactured with water based adhesives that have a low volatile organic compound content. |
These products do not contain or are not manufactured with any of the listed materials considered to be hazardous under the GECA 28-2006 standard. |
Following a review of all MSDS for all chemical ingredients and materials, GECS is confident that none of the abovementioned carcinogenic substances is used in the products under assessment |
All of these products can be separated into recyclable components without the use of specialised tools or expertise. |
Yes |
The products are not coated or impregnated in any way that would prevent post consumer recycling. Any treatments applied (eg, lacquer, powdercoating etc) are applied in order to further extend the useful life of the product |
10 |
|
|
Yes |
The product information consumers are provided which discusses warranty terms, instructions for use, care, storage, maintenance and end of life recycling. |
Yes |
Yes |
|
 |
MDF Based Stairway System, 25mm MDF Treads with Machined Dovetails |
Stairlock |
Commercial and residential staircases |
|
|
25 |
The MDF grades used in the nominated Stairlock International Pty Ltd products are certified under the Environmental Choice Australia Eco-label |
N/A (No reclaimed timber) |
Yes |
Yes |
The MDF grades used in the nominated Stairlock International Pty Ltd products are certified under the Environmental Choice Australia Eco-label |
|
N/A |
Yes |
N/A |
Yes |
No fabrics |
No Glass |
Stairlock International Pty Ltd nominated products have been deemed in conformance with the requirements of this criterion |
Yes |
The substances listed in Overall Loads and Prohibited Substances are not used in the manufacture of the nominated Stairlock International Pty Ltd products |
The products are separable into constituent materials for reuse or recycling as required by the corresponding criterion in the standard. |
Yes |
Yes |
25 |
|
N/A |
Yes |
Stairlock International Pty Ltd have the relevant product information available on the company website or in the point of sale documentation. |
Yes |
Yes |
|
 |
Medusa Pedestals, TSA Tambour Door and Lateral File Cabinets, Actiforce Adjustable Desking (base system only) |
TSA Metal |
|
|
|
10 |
|
|
Yes |
Yes |
|
The Polypropylene tambour door slats are the only plastic parts over 100g. The door slats are marked with the relevant resin identification codes |
|
Yes |
|
Yes |
|
|
|
The certified TSA Metal products do not contain the substances listed in the corresponding criterion in the standard. PVC Tambour Door Slats are not part of the certified range of furniture |
None of the prohibited substances are used in the certified TSA Metal Products range of furniture. PVC is not part of the certified range |
The nominated products are primarily metal and are separable into constituent materials for recycling. |
Yes |
There are no coatings or treatments that prevent the post consumer recycling of the nominated products |
10 |
|
|
Yes |
The care and use manuals available to end users coupled with the product stewardship policy provide sufficient information to satisfy the requirements of the corresponding criterion in the standard. |
Yes |
Yes |
|
 |
Mesh Chair |
Seatmatic |
Nylon based chair |
|
|
5 |
|
|
Yes |
Yes |
|
A site audit of the manufacturing facility has found the resin codes are displayed on the seat, base and wheels of the chair. |
|
Yes |
|
Yes |
Chairs may only be sold as fully certified when upholstered with Environmental Choice Australia, EU Flower or Nordic Swan certified fabrics. |
|
|
|
MSDS for the Powder Coat and black paint used to manufacture the Mesh Chair have been supplied and found to contain none of the substances described in this section of the standard. |
Separability of the mesh chair was confirmed during the site inspection. |
Yes |
A site visit has confirmed that no coatings or treatments prevent the recycling of the product at the end of the product's life. |
5 |
The only recycled parts are the polypropylene, nylon and polyethylene components which are used in the Mesh Chair. |
|
Yes |
|
Yes |
Yes |
The only packaging used is cardboard boxes and Bubble wrap made of polyethylene. An MSDS has been supplied to GECS for polyethylene. All packaging is recyclable and non-halogenated. |
 |
Metal Storage Cabinets, Mobile Shelving Units, Systems Shelving, Mobile Pedestals, Sistema Storage Wall |
CSM Office Furniture Solutions Pty Ltd |
Metal office storage solutions |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
The processed wood panels are currently GECA approved products and thus conformance to the relevant sections in the Standard has already been established. |
There are resin code labels on all plastic components over 100 grams. |
|
Yes |
|
Yes |
|
|
The adhesives used for the certified CSM Office Furniture Solutions workstations are low VOC and do not contain hazardous materials restricted by the GECA Adhesives Standard. |
|
GECS has confirmed that no hazardous or prohibited substances are used in the production. |
The nominated products are easily disassembled into constituent materials without the use of specialised tools for end of life for recycling as required in the standard. |
Yes |
GECS has confirmed that no coatings or treatments are used on these products that would prevent their post consumer recycling. |
5 |
|
N/A |
Yes |
The product information provided at point of sale describes the instructions for use, care and recycling at end of product life satisfying the requirements of this criterion. |
Yes |
Yes |
|
 |
Mirra, Celle & Caper task chairs. Eames Plastic Shell Chair Range. Embody, Aeron Chair. Sense, Abak E Desking |
Herman Miller |
|
|
|
12 |
GECS has confirmed the timber products contained in some of these nominated Herman Miller (Aust.) Pty Ltd products is sourced from FSC certified suppliers. |
|
Yes |
Yes |
The test results indicate that the VOC emissions are within the allowable limits as stated for this criterion. |
GECS has confirmed that all plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code. |
|
Yes |
GECS has confirmed that no banned additives are used during the production of the Polyurethane padding contained in some of these nominated products. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
|
|
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment. |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Herman Miller (Aust.) Pty Ltd products are not treated or coated in any way that would prevent their post consumer recycling. |
12 |
|
|
Yes |
These nominated Herman Miller (Aust.) Pty Ltd products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
MO4 Workstation, FX Workstation, Delta Workstation, MEXL Metal Caddie, MEXL Pedestal |
Markant |
Workstations and Metal Modular Cabinets |
|
|
10 |
The wood based components of these products are sourced from GECA certified suppliers. These companies have previously demonstrated that they meet the requirements of this criterion. |
|
Yes |
Yes |
The processed wood panels are currently certified and thus conformance to the relevant sections in the Standard has already been established. |
|
|
Yes |
|
Yes |
Markant is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
|
The adhesives used for the certified Markant Australia workstations are low VOC and do not contain hazardous materials restricted by the GECA Adhesives Standard. |
|
GECS has confirmed that no hazardous or prohibited substances are added or used in the production of these nominated products. |
The certified Markant Australia workstations are designed to be modular systems, easily disassembled without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that no coatings or treatments are used on these products that would prevent their post consumer recycling. |
10 |
|
|
Yes |
The product information provided at point of sale describes the instructions for use, care and recycling at end of product life satisfying the requirements of this criterion. |
Yes |
Yes |
3.4.7 These products are packaged in recyclable plastic that is not chlorinated or halogenated. |
 |
Moon Chair, Moon Table, CL170 Relax chair, CF170 Relax ottoman, CD170 Relax Dining chair, C110 Highback, CF 110 Highback ottoman, C314, C751, CD515, C202, TS170 |
FeelGood Designs |
Chairs, Tables, Ottomans, Lounge |
|
|
5 |
|
|
Yes |
Yes |
|
|
|
Yes |
|
Yes |
|
|
GECS has confirmed that there are no glues used to manufacture these nominated products. |
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment. |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated FeelGood Designs products are not treated or coated in any way that would prevent their post consumer recycling. |
5 |
|
|
Yes |
These nominated FeelGood Designs products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Neo and Beyon Product Range |
Desking Systems Australia (Ofquest Australia Pty Ltd) |
Workstations |
|
|
10 |
The Neo and Beyon product ranges are available with Laminex E0 18mm and 25mm and D&R Henderson particle board. The Laminex boards are certified products with GECA (licence number LA-2005) and therefore are compliant with the requirements of this criterion |
|
Yes |
Yes |
The Neo and Beyon product ranges are available with Laminex E0 18mm and 25mm and D&R Henderson particle board. The Laminex boards are certified products with GECA (licence number LF-2005) and therefore are compliant with the requirements of this criterion |
The Desking Systems Neo and Beyon product ranges which are the subject of this report, contain a small sheet of Acrylic. Desking Systems has committed to obtaining appropriate resin codes for the material. |
|
Yes |
|
Yes |
The Neo and Beyond product ranges are available with a fabric modesty screen, under the guidelines of this standard there is an allowance for a 10% by weight of non-certified components. |
|
Desking systems use an adhesive for edging. The manufacturer of the adhesive has provided a statement of declaration about the composition of the adhesive in compliance with the requirements of this criterion. |
Desking Systems Australia?s Neo and Beyon product ranges do not use any of the substances mentioned in this criterion, this has been verified via review of all MSDS and a site assessment of the manufacturing facility. |
Desking Systems Australia?s Neo and Beyon product ranges do not use any of the substances mentioned in this criterion, this is apparent by a review of all MSDS and a site assessment of the manufacturing facility. |
The Desking Systems Australia?s Neo and Beyon product ranges can be disassembled into its component parts in 5 minutes by a non-skilled operative. This claim appears to be appropriate because of simplicity of the product and its modular nature by design. |
Yes |
The products are not coated in a manner that would prevent recycling. This was confirmed during a site assessment. |
0 |
|
|
Yes |
|
Yes |
Yes |
|
 |
Office Maxtor, Mobile Pedestal, Waratah Office Cupboards, Mobile Pedestal Filing Cabinets, Maxtor Office Storage Shelving, Maxtor Mechanically Assisted Storage Shelving and Lateral Filing Cabinets |
Brownbuilt |
|
|
|
5 |
Particleboards used by Brownbuilt Pty Ltd are certified with Environmental Choice Australia Mark and holds a valid Good Environmental Choice Australia Licence and do not originate from controversial sources |
|
Yes |
Yes |
|
There are no plastic components that have an individual weight greater than 100g being present in the products under assessment |
|
Yes |
|
Yes |
|
|
|
|
The nominated products do not contain any substance that creates pollutant hazards in the disposal, landfill and/or incineration of end of life furniture |
The nominated products can be easily separated into constituent materials for further recycling. |
Yes |
There is no coating or treatment applied which would prevent recycling |
5 |
|
|
Yes |
These Brownbuilt Pty Ltd products come with sufficient information that fulfils the requirements of this criterion of the Standard GECA-28-2006 Furniture and Fittings. |
Yes |
Yes |
|
 |
Options Furniture, EPIC, Geo, Silhouette, Stratus, Stiletto, Synthesis, Lunar, Rumba Ranges. Life Chair |
Zenith Interiors |
Workstations, tables, chair |
|
|
10 |
The timber products used in some of these nominated Zenith Interiors Pty Ltd products are sourced from a FSC certified supplier with a documented chain of custody. |
|
Yes |
Yes |
The results indicate that the Formaldehyde emissions are well below the allowable limits as stated in the standard for this criterion. |
GECS has confirmed that all plastic components, weighing over 100g, are marked with the appropriate resin identification code for post consumer recycling. |
|
Yes |
|
Yes |
Zenith Interiors Pty Ltd is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
|
The adhesive used in these nominated Zenith Interiors Pty Ltd products has been found to have a low volatile organic component and meets the requirements of this criterion. |
|
GECS has confirmed that no hazardous or prohibited substances are added or used in the manufacturing of these nominated products including the cleaning of manufacturing equipment. |
It has been demonstrated that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Zenith Interiors Pty Ltd products are not treated or coated in any way that prevents post consumer recycling. |
10 |
|
|
Yes |
The nominated Zenith Interiors Pty Ltd products are delivered with literature that discusses correct use and maintenance. The product stewardship policy details end of life recycling instructions. |
Yes |
Yes |
|
 |
Parent Group: Progress (various), INTEGRA S/C (various), T-19 Table (various), CONCORDE Mastermind Desk, Ecologic C and Ecologic T, Ecobalance Folding Exam, and more |
Sebel Furniture Ltd |
See http://www.geca.org.au/product-sebel.htm for full Sebel certified products list
|
|
|
5 |
SEBEL uses timber certified under the Environmental Choice Australia Eco-Label |
|
Yes |
Yes |
|
SEBEL products have proper resin identification codes on them |
|
Yes |
|
Yes |
Sebel Furniture is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
|
SEBEL uses water based adhesive and hot melt glue conforming to the requirements of Adhesives in the standard GECA 28-2006- Furniture and Fittings |
|
SEBEL does not use or add any of the listed hazardous materials or prohibited substances (including PVC) during the manufacturing of the nominated products |
SEBEL products can be disassembled without specialized tools or expertise to facilitate the recovery of the constituent materials for recycling. |
Yes |
The nominated SEBEL products are not coated or treated in a way that would prevent recycling |
5 |
|
|
Yes |
The certified SEBEL products come with sufficient product information regarding cleaning, maintenance and recycling instructions. |
Yes |
Yes |
SEBEL uses bubble wrap and cardboard boxes which can be recycled by local recycling system |
 |
Pert, True, Pulse, Tough, Spark, Nub, Grow, Rest, Grow Up |
ESO |
|
|
|
5 |
Sources fine for their Victorian Ash, Radiata Pine, FSC certified tropical rainforest timbers, Hoop Pine Plywood and Particleboard, Boxboard (Cardboard) |
N/A (No salvaged or reclaimed timber) |
Yes |
Yes |
Ongoing independent and NATA laboratory results confirm emission at below 1mg./lt using the Australian standard testing method |
Plastics contained within the relevant Resin codes that are placed on the products. |
|
Yes |
Not sure but exempt since only 2% padding by weight of product |
Yes |
N/A (covers white furniture not fabric) |
No glass |
|
Yes |
Not Used |
|
Yes |
Yes |
5 |
|
|
Yes |
Yes |
Yes |
Yes |
3.1.3 5 to 10 years warrenty |
 |
Piuma Chair, Liberty Chair, Liberty Mesh Chair, Novetta Chair |
Schiavello |
|
|
|
5 |
|
|
Yes |
Yes |
|
All plastic components weighing greater than 100g are appropriately marked with a plastic resin identification code. The base and back (inner and outer) of the chairs under assessment are coded with the appropriate resin codes. |
There is no synthetic latex or natural latex used in the foam component of the chair under assessment. |
Yes |
A review of MSDS for the foam components from the various suppliers indicates compliance to the requirements of this criterion for the Piuma and Liberty chairs. According to the MSDS, none of the abovementioned prohibited substances are used. |
Yes |
|
|
A water-based adhesive is used to bind foam to the seat base and to fasten textiles to this foam. GECS has reviewed an MSDS for the adhesive and has found it to be fully compliant with the requirements of GECA Standard No - 1: Adhesives. |
The gas lift is highly polished steel and is coated with some chrome finish. However, this is exempt under the requirements of the below criterion 3.3.2 Prohibited Substances for reasons of heavy physical wear. |
No solvents or prohibited substances listed under this criterion are applicable, and this has been verified through a review of Material Safety Data Sheets for the various components. |
The nominated chairs from Schiavello, are designed for disassembly. The component materials (steel, plastic and foam) are able to be re-used or recycled. This was verified by GECS during site assessment of the manufacturing site, as well as through review of appropriate product information documentation. |
Yes |
There are no coatings or treatments applied to the Schiavello chairs that will prevent post consumer recycling. This has been confirmed via a signed declaration and product inspection. |
5 |
|
|
Yes |
GECS have reviewed sample product information that is provided to consumers at point-of-sale and is satisfied that the requirements of this criterion are met. |
Yes |
Yes |
|
 |
Plasma, MD Plasma, Contour Plus Chairs |
Mark Perry Business Furniture |
Task Chair |
|
|
5 |
|
|
Yes |
Yes |
|
Resin Identification codes are stamped on plastic components over 100g. The plastics used for each component is also listed in the product literature. |
|
Yes |
No latex or foam rubber is used in the manufacturing of these products and is therefore exempt from this criterion. |
Yes |
These Mark Perry Business Furniture products use only ECA certified fabrics for the upholstery of the chairs. |
|
Water based adhesive is used in the manufacturing of these products and is compliant to GECA Adhesive Standard GECA 01-2007. |
A review of the production ingredients used in the manufacture of the products under assessment shows that none of the listed hazardous substances are used. |
A review of the production ingredients used in the manufacture of the products under assessment shows that none of the listed prohibited substances are used. |
Mark Perry Business Furniture has demonstrated that the products are sufficiently separable into constituent materials without the use of specialised tools or expertise. |
Yes |
No treatment is applied that would prevent post consumer recycling. |
5 |
|
|
Yes |
The available product information sufficiently covers correct use and recycling instructions. |
Yes |
Yes |
|
 |
Pleated Blinds, Roller Blinds, Motorised Blinds and Panel Glide System |
Verosol |
|
|
|
5 |
|
|
Yes |
Yes |
|
|
|
Yes |
|
Yes |
The fabric range has been found compliant with the requirements of GECA 19-2007 |
|
|
|
No hazardous or prohibited substances as defined by criteria 3.3.1 and 3.3.2 are used in the manufacture of certified Verosol blinds |
The blind fitting can be easily disassembled without the need for special tools or expertise. |
Yes |
The certified Verosol Australia Pty Ltd blinds are not coated or treated in any way that would prevent post consumer recycling |
5 |
|
|
Yes |
Verosol provide a Fact Sheet along with the warranty certificate at point of sale to the client. The Fact Sheet contains information that appropriately describes use, care and recycling at end of life. |
Yes |
Yes |
|
 |
Renaissance Office Chair Collection, Larrikin Office Chair Collection, I-Mesh Chair Collection, Visi Panel Systems, Boulevard Panel System |
GGI |
Partitions and seating |
|
|
10 |
GGI Office Systems has supplied evidence for all timber sources are under recognized certification schemes. |
|
Yes |
Yes |
GGI Office Systems has provided air emission test results which show that the timber-derived components comply with specified formaldehyde emission levels. |
Resin identification codes are marked on plastic components over 100g in weight. |
|
Yes |
MSDS for the polyurethane foams and blowing agents have been reviewed to establish conformance to his criterion. |
Yes |
GGI has confirmed that it will use only Environmental Choice Australia certified fabrics for the nominated product range. |
|
GGI now uses an adhesive which complies with the GECA 01-2007 Adhesives Standard. |
A review of the ingredients lists and MSDS for all chemicals used in the manufacturing revealed that the certified products contained no hazardous substances. |
A site assessment and review of all MSDS for chemicals used to manufacture the certified products has not revealed any prohibited substances. |
GGI nominated products can be easily dissembled without the use of special tools. |
Yes |
GGI nominated products uses powder coating which does not prevent recycling. |
5 |
|
|
Yes |
|
Yes |
Yes |
|
 |
Seating, Tables, Lamp |
Woodmark |
Lounge, Coffee Table, Ottoman, Bench, Armchair, Side Table, Chair, Seat, Lamp, Stool |
|
|
5 |
The suppliers are certified PEFC, FSC or Sustainable Forestry Initiative |
|
Yes |
Yes |
Plywood 0 to 0.5 mg/Litre, Radiata Exterior CD 0.24 mg/l, Birch Plywood 0.2 mg/m2/hour, Alpine MDF E0, all meet the criterion |
Woodmark have advised that the only plastic used in any of the products they are seeking certification for is a mesh that goes under the couches. The weight of this is less than 100 g and is exempt from this criterion. |
|
Yes |
MSDS for the foam used have been provided and these show that the foam meets the requirements of this criterion. |
Yes |
Products seeking to demonstrate GECA compliance for individual project or GreenStar rating for the Australian Green Building Council must be upholstered with GECA compliant fabrics or other GEN Member certified fabrics. |
|
Material Safety Data Sheets have been received for all adhesives used and have been reviewed by GECS. These adhesives satisfy the requirements of GECA Standard No. 1: Adhesives, and are therefore compliant with the requirements of this criterion. |
No products that have Chrome finishes are included in this certification. |
Following a review of all MSDS for all chemical ingredients and materials, GECS is confident that none of the above mentioned substances are used in the Woodmark products under assessment. |
The Woodmark products being assessed do not contain any of the mentioned materials in the proportions noted above. The product range under assessment can be easily disassembled. They are mechanically fixed using cam locks, nuts and bolts. This has been verified during site Assessment and inspection of the finished products.
Woodmark products subject of this report meet the requirements of this criterion. |
Yes |
The products are not coated or impregnated in any way that would prevent post consumer recycling. Any treatments applied (eg, lacquer, powdercoating etc) are applied in order to further extend the useful life of the product. |
5 |
|
|
Yes |
Product Information detailing maintenance instructions and recycling instructions have been received by GECS. This information is provided to the consumer at point of sale. GECS is confident sufficient product information is supplied to consumers along with the products under assessment. |
Yes |
Yes |
|
 |
Selected Artek Stools, Artek Chairs, Artek Tables, 901 Side Trolley, Artek 907B Magazine Table, Artek 88 Combined Seating, Artek 153B Visitor Seating, Artek 100 Screens, Artek 109 Coat Hanger, 112C Bookshelf, 160 Hat Stand, etc |
Anibou |
Furniture |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
Certificates have been provided showing the formaldehyde emissions from the plywood and veneer materials used in the Artek range are below the relevant limits set in the standard. |
|
|
Yes |
The polyurethane padding used in the Armchair 400 contains none of the listed hazardous materials of this criterion. |
Yes |
Anibou is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet the requirements of GECA 28 |
|
The adhesives used in the certified products in the Artek range conform to the relevant requirements of the standard. |
None of the hazardous or prohibited substances listed in this section are used in the certified Artek range of products distributed by Anibou in Australia. |
|
The certified Anibou products are sufficiently separable into constituent materials for the purpose of recycling without the use of specialised tools or expertise. |
Yes |
The lacquer treatment used on the wood is acceptable since it significantly extends the useful life of these products. |
5 |
|
|
Yes |
The available product information is sufficient to satisfy the requirements of this criterion. It contains intended use, instructions for care, and instructions for end of life. |
Yes |
Yes |
|
 |
Sergis, Multipla and Delight ranges |
KFive |
Furniture |
|
|
5 |
The suppliers of timber used by KFive are FSC, GECA or PEFC certified |
The product range by KFive subject of this report contains no salvaged or reclaimed timber |
Yes |
Yes |
GECA has received formaldehyde testing from one of the Kfive suppliers and the results show that the air emissions are in compliance with the requirements of this criterion. For their second supplier, a certification is displayed on their website |
The plastic resin code is displayed throughout the product range on plastic components. |
This criterion is not applicable, as the product range does not contain any latex components |
Yes |
GECA received fitness for purpose information for polyurethane, and MSDS for the agents used in the manufacture of the urethane polymers. A document from the foam supplier states that the substances prohibited in this criterion, are not used |
Yes |
The certification only certifies the white furniture and does not cover the fabric that will be subject to the choice of individual customers. Thus this criterion is not applicable to nominated product |
The Kfive products which do not contain a mirror meet the subject of this criterion |
The KFive product range does not contain adhesives, therefore this criterion is not applicable |
Many of the KFive products can be optioned with chrome parts or chrome finishes, the use of chrome is in conflict with the requirements of this criterion, and products containing chrome are not licensed by GECA |
A statement received by GECA indicates that no carcinogenic substances are added to the products supplied by KFive. A review of MSDS for production ingredients has verified this |
The product range is designed for ease of disassembly, the products are mechanically fixed, there is no barrier to the separation of the different components for future recycling |
Yes |
GECA are satisfied that no coating or treatment is applied to the KFive product range which may prevent recycling |
5 |
|
This criterion of the standard is not applicable to this assessment |
Yes |
GECS have inspected the product information supplied with KFive products, including a maintenance manual & instructions for correct care. A signed statement has been received demonstrating that KFive will issue this information with every certified product, as well as details of intended use and product custodianship. |
Yes |
Yes |
|
 |
Seta Chair |
Insitu |
Executive Seating |
|
|
7 |
The wood product contained in the Seta chair that Insitu Pty Ltd source has been demonstrated to not have originated from controversial sources as stated for this criterion |
|
Yes |
Yes |
The wood component of the nominated chair has been tested for formaldehyde emissions and found to be compliant to the requirements of this criterion |
Resin code labels are printed on plastic components for end of life recycling |
|
Yes |
GECS has confirmed that the padding does not use any organic tin catalysts, additives, blowing agents that are restricted according to the criterion in the standard |
Yes |
Insitu Pty Ltd upholsters GECA certified products with only GECA, EU Flower or Nordic Swan certified fabrics |
|
|
|
GECS has confirmed that no hazardous or prohibited substances are used in the production |
The nominated products are easily disassembled into constituent materials without the use of specialised tools for end of life for recycling as required in the standard |
Yes |
GECS has confirmed that no coatings or treatments are used on these products that would prevent their post consumer recycling |
7 |
|
|
Yes |
The product information provided at point of sale describes the instructions for use, care and recycling at end of product life satisfying the requirements of this criterion |
Yes |
Yes |
|
 |
Shelving Solutions |
Commando Storage Systems |
Efficient File Storage Systems |
|
|
5 |
The Ezi-Glide unit sometimes contains an infill particle board floor which is pre-cut to size by Plyboard Distributors who buy Grade E1 particle board from Laminex - a product which is certified separately by GECA under Licence LA-2005 |
|
Yes |
Yes |
|
A plastic handle is an optional component for the Ezi-Glide unit. The PACIA Code is ?7 - Other? and Commando Storage Systems have committed to placing a sticker on this optional component in order identify it with the appropriate resin code. |
|
Yes |
|
Yes |
|
|
The Powerstick by Powers Fasteners is used in applying the false floor, this product is GECA certified under licence POF-2006 and therefore compliant with the requirements of this criterion. |
A review of all production ingredients and MSDS for all ingredients used, including adhesive powder coating etc, establishes compliance with the requirements of this criterion. None of the substances dealt with by this criterion are used in the Ezi-Store |
A review of all production ingredients and MSDS for all ingredients used, including adhesive powder coating etc, establishes compliance with the requirements of this criterion. None of the carcinogenic substances dealt with by this criterion are used |
There is no technical barrier to the disassembly of the Commando Storage System certified products; this was confirmed during a site assessment of the manufacturing facility. |
Yes |
No treatment is applied that would prevent recycling; this was confirmed during a site assessment of the manufacturing facility as well as via documentation review of production ingredients and Material Safety Data Sheets. |
5 |
|
|
Yes |
The intended use of the product is self-evident. Documented Operations and Maintenance Instructions are provided for both the Ezi-Glide and Ezi-Store products.
|
Yes |
Yes |
3.2.2.2.(2) No foam, 3.2.2.3.(3) No polyurethane |
 |
Sixty-Six, Quad, Zone, Vie System |
Head Office |
Desking and workstation solutions |
|
|
5 |
Head Office Group use MDF Panels for worktops, the MDF products are currently certified under the Environmental Choice Australia Ecolabel and thus meet the requirements of this criterion. |
|
Yes |
Yes |
|
Perspex is used in the nominated Head Office Group products and is the only plastic component over 100g, Head Office Group has committed to affixing a resin identification code sticker or having it clearly identified in the relevant recycling type. |
|
Yes |
Environmental Assurance confirms that the polyurethane padding used in the nominated products conforms to the relevant requirements of the corresponding criterion in the standard. |
Yes |
Head Office Group is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28 |
A site assessment and ingredients list has revealed no glass is used in the nominated product under assessment. |
The adhesive used in the manufacture of the nominated products has been assessed and Environmental Assurance confirms that the adhesive is in conformance with the relevant requirements of the standard. |
|
None of the substances listed in Overall Loads and Prohibited Substances criteria in the standard are used in the manufacture of the certified Head Office Group products. |
The nominated Head Office Group products are separable into constituent materials as required by the corresponding criterion in the standard. |
Yes |
Environmental Assurance confirms that there are no coatings or treatments that prevent post consumer recycling of the certified Head Office Group products. The only treatments used are intended to extend the useful life of the product. |
5 |
|
|
Yes |
There is sufficient product information available to end users of the nominated Head Office Group products. |
Yes |
Yes |
|
 |
Slim Lounge, Couch, Relax/ Highback, Bekko Chair, Seat, 3000, Moon, Elan, Boda Table, Collecta Bill Table Series, Kobe Tables, Spin Table, Milani Buffet |
Interstudio |
Lounge, Couch, Cabinet, Chairs, Stools, Tables, Consoles and Daybeds |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
The formaldehyde emissions for all wood components are below 0.5 mg/m2h. Testing done according to ASTM D51-16 Small Scale Environmental determination of organic emissions from indoor materials. |
|
|
Yes |
The nominated Interstudio products are all upholstered with foam padding already certified under the Environmental Choice Australia Eco-Label. |
Yes |
Interstudio is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed as part of this assessment and found to not compromise the ability of the furniture and fittings to meet GECA 28-2006 |
The glass in the Spin Table is 10mm clear float glass and does not contain any additives or treatments restricted by the corresponding criterion in the GECA Furniture and Fittings Standard. |
The adhesives used in the certified Interstudio products conform to the GECA Adhesives Standard. |
There is none of the listed hazardous or prohibited materials or heavy metals comprised in the primary materials used to manufacture the nominated Interstudio products. |
None |
The Certified Interstudio products are sufficiently separable into constituent materials for recycling. |
Yes |
None of the coatings or treatments used will prevent post consumer recycling. |
5 |
|
|
Yes |
Interstudio has released product information for the certified products range that indicates correct use, care and recycling at the end of product life. |
Yes |
Yes |
|
 |
Slim Series Table, 204 Table, Timber Turned Stool, Coat Stand, Juha Chair, Credenza Storage Table, Hyatt Spa Chair |
Koskela |
|
|
|
10 |
Koskela uses plywood certified under the Environmental Choice Australia Eco-Label. |
|
Yes |
Yes |
|
|
|
Yes |
|
Yes |
|
|
Koskela uses low VOC water based adhesive in their products. |
|
Koskela does not use or add any of the hazardous materials or prohibited substances (including PVC) listed under criteria 3.3.1 and 3.3.2 of GECA 28- 2006- Furniture and Fittings standard during the manufacturing of the nominated products. |
Koskela products can be disassembled without specialized tools or expertise to facilitate the recovery of the constituent materials for recycling. |
Yes |
|
5 |
|
|
Yes |
The certified Koskela products come with sufficient product information regarding cleaning, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
SM Tambour Range, SR Receding and SS Swing Door Units, SB: Bookcases, Flox Planter Box Range, SP: Open Units, SD: Lateral File Unit |
Planex |
Planex is an innovative, award winning Australian manufacturer of quality commercial office storage, security and plan storage. The nominated products are made up of either steel or the combination of steel and polypropylene. |
|
|
5 |
N/A (No Timber) |
N/A (No reclaimed timber) |
Yes |
Yes |
No formaldehyde |
GECS has confirmed that the plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code. |
N/A (No synthetic & natural latex) |
Yes |
No polyurethane padding |
Yes |
No fabric |
No glass |
No adhesives |
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes. |
It has been demonstrated to GECS that these nominated products can either be easily disassembled into their constituent materials without the use of specialised tools for further recycling or can be recycled without the need for disassembly. |
Yes |
GECS has confirmed that these nominated Planex products are not treated or coated in any way that would prevent their post consumer recycling. |
5 |
|
N/A |
Yes |
These nominated Planex products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Smooth and Figure table range |
Corporate Culture |
Furniture
|
|
|
|
The table range under assessment is available with an MDF or EO particleboard top, finished with the range of GECA certified laminates or veneers. The timber components of the product are already certified by GECA and therefore satisfy the requirements. |
|
Yes |
Yes |
|
The products are available with an option of a folding top, this product includes a plastic part that is heavier then 100g. During a site assessment a GECA qualified assessor witnessed the appropriate use of the resin code on these components. |
|
Yes |
Yes |
Yes |
|
|
|
The only product ingredient of concern in relation to this criterion is powder coatings. GECA inspected MSDS for powder the coating and found this product is in compliance to the requirements of this criterion. |
The only product ingredient of concern in relation to this criterion is powder coatings, no other substances or finishes are applied to the nominated product range. The powder coatings was found to be in compliance to the requirements of this criterion. |
The table range under assessment is mechanically fixed, there is no barrier to the disassembly of the product range. This was witnessed by a GECA qualified assessor during a site assessment. |
Yes |
The manufacturer offers a take back arrangement to the market. Products are to be returned to Thinking Ergonomics under the terms of the policy. Thinking Egronomics have engaged the services of plastic, metal and cardboard recyclers. |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
|
 |
Sofas, Beds, Chairs and Tables |
Jardan Australia |
|
|
|
7 |
GECA has reviewed forestry certification, Chain of Custody Certification and delivery invoices from timber suppliers confirming sustainable timber is used. Jardan have a standing arrangement that only AFS certified timbers are to be used |
|
Yes |
Yes |
GECA have reviewed test results from CETEC for overall product emission tests. Material emissions results confirmed levels of total Volatile Organic Compound Emissions. |
|
|
Yes |
GECA have reviewed MSDS for the foam used by Jardan Australia and found it to be a reaction product of toluene diisocyanate. GECA has previously undertaken assessments of this product line and has found it to be compliant with this criterion's limitations |
Yes |
This certification applies to the white furniture only and does not include the fabric that will be subject to the choice of Jardan Australia individual customers. Thus the Jardan furniture is licensed as white furniture. |
|
Jardan Australia have switched to using a water-based, solvent free adhesive, which is LGA certified. |
Yes |
Not Used |
A GECA certified assessor has undertaken an inspection of the products and found that there is no barrier to separation for recycling. |
Yes |
There are no coatings or treatments applied to the furniture which will prevent post consumer recycling, therefore Jardan Australia range of furniture subject of this report meets the requirements of this criterion. |
7 |
|
|
Yes |
This information is provided as part of the overall product delivery process and available on the Jardan website. Future deliveries will include this information as part of the physical delivery process. |
Yes |
Yes |
|
 |
Solaton, Solaton Nashiji, Solaton Enet |
Fricker Ceiling Systems |
Ceiling systems |
|
|
10 |
N/A (sourced from by-products of steel industry and recycled ceiling waste materials from Construction sites) |
N/A (No reclaimed timber) |
Yes |
Yes |
0.18 mg/m3 |
|
N/A (no padding) |
Yes |
N/A (no padding) |
Yes |
No fabric |
No glass |
No adhesives |
Fine - Certified by the Japanese Ecolabel, The Ecomark |
Not Used |
There does not appear to be any technical barrier to the disassembly of the Solaton products under this certification. |
Yes |
Yes |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
3.2.2.1 N/A (no plastics) |
 |
Space 50, Alpha, Delta, Scholar, Stirk, Munich, Stockholm |
Interia Systems |
Tables, Workstations, Desks, Storage Units |
|
|
5 |
Interia Systems source wood panels that are currently GECA approved products. |
|
Yes |
Yes |
The processed wood panels are currently GECA approved products and thus conformance to the relevant sections in the Standard has already been established. |
|
|
Yes |
|
Yes |
|
|
The adhesives used for the certified Interia Systems nominated products are low VOC and do not contain hazardous materials restricted by the GECA Adhesives Standard. |
|
GECS has confirmed that no hazardous or prohibited substances are used in the production. |
The nominated products are easily disassembled into constituent materials without the use of specialised tools for end of life for recycling as required in the standard. |
Yes |
GECS has confirmed that no coatings or treatments are used on these products that would prevent their post consumer recycling. |
5 |
|
|
Yes |
The product information provided at point of sale describes the instructions for use, care and recycling at end of product life satisfying the requirements of this criterion. |
Yes |
Yes |
|
 |
Sputnik Chair, Goal Chair, Xantos Chair |
Emanate Design/ Intersthul Australia |
Chairs for commercial and residential use |
|
|
|
The suppliers of timber used by Emanate Design are FSC certified. |
The certified product range by Emanate Design contains no salvaged or reclaimed timber and is therefore exempt from this criterion. |
Yes |
Yes |
GECA has received plywood testing for the timber components used in the Emanate Design products. The results showed evidence of compliance with this criterion. |
The plastic resin code is displayed throughout the product range on plastic components. |
This criterion is not applicable to this range as the product range does not contain any latex components. |
Yes |
GECA received fitness for purpose information for polyurethane, and MSDS for the agents used in the manufacture of the urethane polymers. |
Yes |
Emanate design recommends the use of Sustainable Living Fabrics textiles, these are certified by GECA and therefore comply with the requirements of this criterion. It is recommended that other certified GECA textiles are also recommended to clients. |
This criterion is not applicable to this product range, as the products do not contain any glass components. |
This criterion is not applicable as the product range does not contain any adhesives. |
GECA inspected MSDS for production ingredients, provided by Emanate Design, none of the substances addressed by this criterion are contained in the ingredients. Chrome optional finishes/parts are not certified. |
A statement received by GECA indicates that no carcinogenic substances are added to the products supplied by Emanate Design. A review of MSDS for production ingredients has verified this. |
The product range is designed for ease of disassembly, the products are mechanically fixed, and there is no barrier to the separation of the different components for future recycling. |
Yes |
GECA are satisfied that no coating or treatment is applied to the Emanate Design product range which may prevent recycling. |
5 |
This criterion of the standard is not applicable to this product line. |
This criterion of the standard is not applicable to this product line. |
Yes |
GECS has inspected the product information supplied with Emanate Design products, including a CD-ROM of relevant information to end users. Emanate Design meets the requirements of this criterion. |
Yes |
Yes |
|
 |
Standard CRAFTWOOD MDF, E0 PARTICLEBOARD; Moisture Resistant CRAFTWOOD MDF, PARTICLEBOARD; VERTIBOARD E0, VERTIBOARD MR E0, & STRUCTURAL MR E0; LAMIWOOD (DECORATED Moisture Resistant MDF); DECORWOOD (DECORATED MDF) |
The Laminex Group |
Manufacturer, marketer and distributor of high pressure and low-pressure decorative surface laminates |
|
|
7 |
Fibre sources were tracked, documented and investigated for origin. All fibre sources originate from plantation forests in Australia with the vast majority being from softwood plantation and sawmill residue |
N/A (No reclaimed timber) |
Yes |
Yes |
Standard MDF 0.81 < 1.0, Moisture Resistant MDF 0.74 < 1.0 |
|
No Padding |
Yes |
No Padding |
Yes |
No Fabric |
No Glass |
No adhesives |
Yes |
Not Used |
The final product range does not prohibit recycling on the basis of coatings, treatment or mechanical properties |
Yes |
Laminate decreases recyclability of product however it increases lifetime and therefore is allowable |
0 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
3.2.2.1 N/A (No plastics); 3.4.2 Yes - in preliminary stages |
 |
Steel Cabinets, Tambour door Cabinets, Steel Lockers, Horizontal Filling Cabinets, Entomological Cabinets, Flammable Liquid Cabinets, Cabinet Accessories |
FGP Company Pty Ltd |
Storage Office Solutions |
|
|
5 |
Following the assessment process by GECA the manufacturer decided to provide the product range with GECA certified Laminex E0 and Laminex MDF finished with the Laminex laminates or GECA certified veneers by Briggs Veneers. |
The nominated products contain no salvaged or reclaimed timber. |
Yes |
Yes |
The use of GECA certified timber products achieves compliance to the requirements of this criterion. |
The Tambour Door Cabinets are available with PVC and polypropylene doors. Products using PVC are not certified under this assessment. The Polypropylene extrusions were found to be marked with the PP code. |
|
Yes |
The nominated products contain no padding materials. |
Yes |
The nominated products contain no fabrics. |
The Entomological Cabinets contain 3mm glass drawer tops which are compliant with the requirements of this criterion. |
The Flammable Liquid Cabinets contain a door seal that is designed to withstand extreme temperatures. FGP use Liquid Nails, a solvent based adhesive, as water based products will evaporate and fail to provide the fitness for propose needed. |
GECA inspected MSDS for powder coats, adhesives and solvent based cleaners used in the production of the FGP products. These were found compliant to the requirements of this criterion. |
None of the substances mentioned in this criterion are added to the products under assessment; this is apparent by a review of MSDS for all production ingredients. |
The products are very easily separated into the different materials; this was witnessed by a GECA qualified assessor during a site assessment.
|
Yes |
GECA has received a copy of a take back policy signed by the General Manager. FGP will accept products at end of life and use established recyclers to recycle the different components. FGP have established arrangements with Southern Recycling |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
3.2.2.1 The Tambour Door Cabinets are available with PVC and polypropylene doors. Products using PVC are not certified under this assessment. |
 |
Student Desks, Storage Mates, Security Lockers, Bookcases, Student Seating |
Woods Furniture |
|
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard. |
|
Yes |
Yes |
The test results indicate that the VOC emissions are within the allowable limits as stated for this criterion. |
GECS has confirmed that all plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code. |
|
Yes |
|
Yes |
|
|
GECS has confirmed that all adhesives used to manufacture these nominated products are low in VOCs and compliant with the GECA 01-2007 Adhesives standard. |
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment. |
These nominated products have been designed to be not easily separated as they are intended for use in schools. Woods Furniture Pty Ltd has a product stewardship program in place and products may be returned in one piece at their end of life for recycling. |
Yes |
GECS has confirmed that these nominated Woods Furniture Pty Ltd products are not treated or coated in any way that would prevent their post consumer recycling. |
5 |
|
|
Yes |
These nominated Woods Furniture Pty Ltd are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
These nominated Woods Furniture Pty Ltd products are transported with recyclable cardboard boxes and plastic bubble wrap. |
 |
Summa and Memo.S Table ranges |
Arredorama |
Tables |
|
|
7 |
They products exhibit suitable PEFC and FSC certified Chain of Custody evidence and materials sourced from sustainably managed forestry operations. |
|
Yes |
Yes |
The certified tables can only be sold with the ECA Mark when they are made using timber derived components that have been assessed and approved by GECS. Processed wood products that are certified with the ECA Mark meet the requirements of this criterion. |
Plastic components around 100 grams or over in weight are marked with appropriate resin identification codes. |
|
Yes |
|
Yes |
|
|
|
An MSDS has been provided for powdercoat, which does not contain any of the hazardous substances listed in this criterion. |
GECS has confirmed from the MSDS for the powdercoat material that none of the prohibited substances listed in this criterion are used in the manufacture of the Summa Tables and Memo.S Tables. |
It was determined during a product inspection that the table products sold by Arredorama that are subject of this report are readily separable into constituent materials without the use of special tools or expertise. |
Yes |
A site visit has confirmed that no coatings or treatments prevent the recycling of the product at the end of the product's life. |
5 |
|
|
Yes |
|
Yes |
Yes |
|
 |
Task Chairs, Visitor Chairs, Executive Chairs, Tables (various) |
Sturdy Framac |
|
|
|
5 |
Timbers used in the nominated products do not originate from controversial sources |
|
Yes |
Yes |
The formaldehyde emissions from wood used in the nominated products meet the requirements of this criterion |
|
|
Yes |
The manufacturer uses Environmental Choice certified polyurethane |
Yes |
Sturdy Framac is upholstering its furniture and fittings in only GECA certified fabrics or fabrics which have been assessed and found to not compromise the ability of the furniture and fittings to meet the requirements of GECA 28 |
|
|
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes in compliance to the requirements of the criterion |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Sturdy Framac products are not treated or coated in any way that would prevent their post consumer recycling |
5 |
|
|
Yes |
These nominated Sturdy Framac products are delivered with sufficient information that fulfils the requirements of this criterion. |
Yes |
Yes |
|
 |
Task Chairs: Rexa S4 and S5, Delta 3, 4, 5 & 9, and Max. Manager Chairs: Domino, Bodyline, Tora. Visitor Chairs: Astra, Venice. Workstations Plus Screens: Variation and Direction Series. Desks and Mobile Storage. Tables and Educational Storage |
Office Furniture Design (OFD) |
|
|
|
5 |
The wood based materials used in the certified OFD Pty Ltd products are sourced from FSC certified forestry operations |
|
Yes |
Yes |
The processed wood components sourced for the manufacture of the certified OFD Pty Ltd furniture have formaldehyde emissions that do not exceed the limits set in the corresponding criterion of the GECA 28-2006 Standard. |
The relevant Resin Identification Codes are stamped on plastic parts over 100g. |
|
Yes |
The nominated products are certified as White Furniture only. Upholstery material such as padding is not included in the scope of certification. |
Yes |
The products are certified as non-upholstered white furniture only. Textiles are thus not part of the certification and therefore this criterion is not applicable. |
OFD Pty Ltd Offer the option for toughened clear float glass on Workstations. |
OFD use low VOC adhesives that conform to the requirements of the GECA 01-2007 Adhesives Standard. |
The restricted materials listed in the corresponding criterion in the GECA Furniture and Fittings Standard are not added to the certified OFD Pty Ltd products during manufacture. |
The OFD Pty Ltd certified furniture does not contain any prohibited materials. However chrome is used on gaslifts and is allowable under the exception that gas lifts require tight connection and are not intended to come into contact with skin. |
The certified OFD Pty Ltd furniture is separable into constituent materials for recycling without the use of specialised tools or expertise. |
Yes |
The nominated OFD Pty Ltd products are not impregnated, coated or treated in any way that would prevent post consumer recycling, except for where the coating extends the useful life of a product. |
5 |
|
|
Yes |
The care and maintenance instructions coupled with the warranty and product custodianship documents provided at point of sale provide sufficient information to the end users. |
Yes |
Yes |
|
 |
Tempo Chair Range, Track System |
Workspace |
Workstations, Chairs |
|
|
10 |
Laminex Melamine E1 which is appropriately edged and Standard laminex Particleboard (EO) and MDF (E1) from Laminex |
|
Yes |
Yes |
Workspace Commercial Furniture?s custom product range is manufactured with Laminex and Laminex Formica GECA certified timber boards. These products are certified as part of a separate assessment. |
All plastics over 100gr in weight have been checked for compliance to this criterion and exhibit the appropriate plastic resin code. |
|
Yes |
The Tempo Chair contains Endurofoam sourced from Dunlop. This foam was discovered to be EN38 200 grade or EN 36-80 Grade. These product lines have previously been assessed for compliance to the requirements of the GECA label and currently hold a licence |
Yes |
The products under assessment has been assessed as white furniture and do not contain any fabric. |
|
Exemption is provided in this standard for edgeband adhesives which are typically solvent or hot melt based systems in Australia. |
|
None of the certified products contain any of the prohibited substances listed under this criterion; a statement confirming this has been received from Workspace Commercial Furniture and a site inspection has confirmed the validity of this statement. |
Workspace Commercial Furniture products covered under this assessment are compliant with this criterion. They products are mechanically fixed using cam locks, nuts and bolts and can be easily disassembled.. This has been verified during Site Assessment and inspection of the finished products. All products are easily broken down into component materials as required by this criterion. |
Yes |
Apart from the powder-coating and painting applied to some products, which are exempt from this criterion, there is not any coating or treatment applied to the Workspace Commercial Furniture products that will prevent post consumer recycling. |
10 |
|
|
Yes |
Workspace Commercial Furniture have provided GECS with a copy of the swing tag and the sticker detailing maintenance instructions attached to the furniture. Information on recycling has been included with the products. This information is provided to the consumer at point of sale. GECS is confident sufficient product information is supplied to consumers along with the products under assessment. |
Yes |
Yes |
|
 |
Therapod Range: Contemporary, Classic, Flexiform and Task; VTEQ range: V1, V2, V3, V5 and V6; Energy range: Series 1, Series 2, Task, Beam seat and Visitor; General seating: IT+ |
Therapod |
Seating |
|
|
5 |
|
|
Yes |
Yes |
|
The resin identification codes on the plastic components of Therapod products indicate that they fall into the recyclable materials categories 5, 6 and 7. |
|
Yes |
Therapod Seating Solutions uses several polyurethanes in the certified products. Therapod Seating Solutions has provided evidence (including material safety data sheets) that the polyurethane foam used in its products comply. |
Yes |
The Therapod Seating Solutions range of office chairs can be upholstered to customer specifications. The range of fabrics available Therapod Seating Solutions customers includes Environmental Choice Australia (ECA), Nordic Swan and EU Flower fabrics. |
|
Therapod Seating Solutions uses water-based, low VOC adhesive products. |
A review of the production ingredients has demonstrated that the certified Therapod Seating Solutions products do not contain hazardous materials. |
Analysis of the production ingredients has demonstrated that the certified Therapod Seating Solutions products do not contain prohibited substances including carcinogens. |
Separability of the Therapod certified products was confirmed during an on-site product inspection. The products are easily separable for recycling using common tools. |
Yes |
The only coating used on the Therapod Seating Solutions products during manufacture is a silicone spray. The MSDS for this product confirms that none of its ingredients are likely to prevent recycling of the product. |
5 |
|
|
Yes |
The Guarantee issued with each chair, and labels attached to the products, indicate the intended use of the product as well as maintenance information. The warranty information provided clearly outlines the terms so that the life of the chair may be extended through correct storage and maintenance. Additional labels also outline correct care of fabrics and covers. |
Yes |
Yes |
|
 |
UNICON Flat Pack Cable Basket |
DPG Formfittings |
|
|
|
5 |
|
|
Yes |
Yes |
|
The cable basket component of this certified product is printed with the appropriate resin identification code. The bracket component weighs less than 100g and is therefore not required to display the resin identification code. |
|
Yes |
|
Yes |
|
|
The UNICON Flat Pack Cable Basket is designed to be assembled without the use of adhesives; instead the components push and click together. |
GECS has confirmed that no hazardous or prohibited substances are added or used during the manufacturing of this product. |
This product is certified as compliant with the U.S. Food and Drug Administration and the EU directive on the restriction of hazardous substance in Electrical and Electronic Equipment. |
This certified product is easily separated as it is flat pack fitting consisting of two brackets and a basket. GECS has confirmed that no specialized tools or expertise are required. |
Yes |
GECS can confirm that no coatings or treatments are applied to this product that would prevent its post consumer recycling. |
5 |
|
|
Yes |
OPS Formfitting Asia Pacific Pty Ltd has available brochures and information sheets with instructions for use, maintenance and recycling. |
Yes |
Yes |
|
 |
Urethane Foam |
Hetin Foams |
|
|
|
5 |
|
|
Yes |
Yes |
|
|
|
Yes |
Foams produced by Hetin do not use any prohibited chemicals as production ingredients or blowing agents. |
Yes |
|
|
Hetin foams have succesfully substituted a solvent based adhesive for a waterbased adhesive for the purpose of repairing damaged foam from production. |
All chemicals used in the manufacturing of the foam are non-hazardous. |
Hetin Foams do not use prohibited substances in the manufacturing of their urethane foam |
There is no barrier to the appropriate recycling of the product. |
Yes |
No coatings or treatments which may prevent any recycling or limit the life of the certified product have been applied during production. |
5 |
|
|
Yes |
|
Yes |
Yes |
Hetin Foam Pty Ltd has established a product take back policy covered by the commercial warranty. |
 |
Veneers: Italian Poplar plantation, FSC Certified Timber AFS Certified Timber, PEFC Certified Timber |
Briggs Veneers |
Veneer for panel layers/distributors |
|
|
|
This was achieved through certification to various forestry standards and evidence of plantation origin for the Italian Poplar veneers. |
|
Yes |
Yes |
The manufacturing process for leaf veneers does not include any formaldehyde resin treatment. Two samples were assessed for overall formaldehyde emissions to Australian Standards and results have demonstrated compliance below the required levels. |
|
|
Yes |
Yes |
Yes |
|
N/A (no glass) |
|
The manufacturing process was assessed during the site inspection revealing no additives that contain these ingredients. |
No additives contain these ingredients. |
The Briggs Veneers Pty Ltd product range is not considered a separable material from the substrate board therefore this criterion is not applicable. |
Yes |
|
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
An inspection of MSDS for production ingredients found no carcinogenic substances, (except formaldehyde resins which are exempt from this criteria) |
 |
Verde Spacio, Verde Torretta, Verde Carrello |
Europlan |
|
|
|
lifetime |
|
|
Yes |
Yes |
|
The relevant resin identification codes are imprinted on plastic components over 100g. |
|
Yes |
|
Yes |
|
|
The adhesive used in the nominated Europlan Industries Ltd. Products is found to be in conformance with the relevant requirements of the standard. |
|
No listed hazardous substances under Overall Loads or Prohibited Substances are used in the certified Europlan Industries Ltd Verde Tambour Door Cabinets. |
The nominated products are separable into constituent materials for recycling without the use of specialized tools or expertise. |
Yes |
The nominated Verde Tambour Door Cabinet products are not coated or treated in any way that would prevent post consumer recycling. |
lifetime |
|
|
Yes |
The relevant product information is covered in the product brochure available to end users at point of sale. This document covers correct use, maintenance, recycling instructions and disassembly. |
Yes |
Yes |
The nominated products are packaged in cardboard, LDPE bubble wrap and LDPE stretch film. |
 |
Vito Task Chair |
Eastern Commercial Furniture |
ECF markets furniture for the commercial office, hospitality, industry, educational, retirement homes and government.
|
|
|
|
The plywood shells in the nominated chair are sourced from FSC certificated forest. The certification was issued by Woodmark, UK. |
The nominated chair contains no salvaged or reclaimed timber. This criterion is not applicable. |
Yes |
Yes |
GECA has an emission test report preformed by CETEC. The result is 0.2ppm; this is in compliance with the 0.3ppm limit stipulated in this criterion. |
The required resin identification codes are displayed on all plastic parts. |
|
Yes |
GECA has received confirmation from foams suppliers confirming that the foam they supply is in compliance with the requirements of this criterion. |
Yes |
This certification only certifies the white furniture and does not cover the fabric that will be subject to the choice of individual customers; thus this criterion is not applicable. |
The Vito chair does not contain any glass components; thus this criterion is not applicable. |
ECF make use of solvent-based adhesives in applying fabric to padding material. These products are high in VOC. Under the requirements of this criterion ECF will be required to test water-based low VOC alternatives when these come on the market |
GECA inspected MSDS for all production ingredients and found that they do not contain the substances mentioned in this criterion. A statement by the manufacturer confirms none of the substances mentioned in this criterion are added to the product. |
None of the substances mentioned in this criterion are added to the products under assessment; this is apparent by a review of MSDS for all production ingredients. |
The chair is largely mechanically fixed, and there is no technical barrier to the disassembly of the product. |
Yes |
ECF have committed to providing a take back service to the market, chairs will be returned to the manufacturer under their take back service, donated or sold to second hand distributors. |
5 |
|
N/A |
Yes |
Yes |
Yes |
Yes |
|
 |
Zody Task chair, Zody Side Chair. Allways, Xone, Bamboo, Tutti Workstation System |
Haworth |
|
|
|
5 |
GECS has confirmed that the timber components contained in some of these nominated products is sourced from various FSC certified suppliers. |
|
Yes |
Yes |
The test results indicate that the formaldehyde emissions are within the allowable limits as stated for this criterion. |
GECS has confirmed that all plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code. |
|
Yes |
GECS has confirmed that none of the banned additives as stated for this criterion are used during the production of the Polyurethane foam contained in some of these nominated products. |
Yes |
The manufacturer has acknowledged and the license conditions stipulate that only fabrics assessed according to the relevant Environmental Choice Australia Standard requirements can be used in certified furniture. |
|
GECS has confirmed that the glues used to manufacture these nominated products are water based and low VOC and meet the relevant requirements stated for this criterion. |
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment. |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
Yes |
5 |
|
N/A |
Yes |
These nominated Haworth Australia Pty Ltd products are delivered with literature that discusses correct use, maintenance and recycling instructions. |
Yes |
Yes |
|
 |
Zurich, T-Wall, Agility |
Aspect Furniture |
Workstation System, Modular Screening System, Tables |
|
|
5 |
The evidence shows that the timbers do not come from controversial sources and meet the requirements of the corresponding criterion in the Standard |
|
Yes |
Yes |
The formaldehyde emissions from the wood components contained in some of these nominated Aspect Furniture Systems products are less than 0.5mg/l which is far lower than the allowable limits stated for meeting the requirements of this criterion |
GECS has confirmed that the plastic components of these nominated products weighing over 100g are labeled with the appropriate resin identification code |
|
Yes |
|
Yes |
|
|
|
|
GECS has confirmed that no hazardous or prohibited substances are used or added to these products during their manufacturing processes, this includes the cleaning of the production equipment |
It has been demonstrated to GECS that these nominated products are easily disassembled into their constituent materials without the use of specialised tools or expertise. |
Yes |
GECS has confirmed that these nominated Aspect Furniture Systems products are not treated or coated in any way that would prevent their post consumer recycling |
5 |
|
|
Yes |
These nominated Aspect Furniture Systems products are delivered with literature that fulfils the requirement of this criterion. |
Yes |
Yes |
These Aspect Furniture Systems products are packaged in cardboard boxes and plastic bags |
