Login

Panel Board


Product Image Product Name Name of Manufacturer Functional Purpose of Product Data Quality 3.1 Product is fit for intended purpose and meets or exceeds relevant standard or demonstrates sufficient quality 3.2.1.1 Fibre Sources: Geographical Origin is Documented. Is a FSC or other sustainably managed certification and does not originate from illegal harvesting, genetically modified organisms or uncertified high conservation value communities 3.2.1.2 Salvaged & Reclaimed Timbers - If used, are GECA certified 3.2.1.3 Treatment: Is not treated with hazardous fungicides and insecticides. Wood preservatives contain < 5% (wt.) organic solvents (some exceptions). Creosote not used. Outdoor products contain <0.1% risk phrase substances 3.2.1.4 Glues in Wood: Free formaldehyde does not exceed 1% w/w 3.2.1.5 Emissions Requirements: Wood and other formaldehyde containing products are subject to air emission limits for formaldehyde 3.2.1.6 Paper Processing: Paper bleaching does not contain or give off chlorine, and surfactants are biodegradable (some exceptions) 3.2.2.1 Resin Identification Codes: Products weighing more than 100g are marked with a resin identification code (some exceptions) 3.2.2.2 Additives: Certain additivies are not used. 1,3 butadiene if used is < 1mg/kg. Discharges to water from foam rubber production are treated by 90% 3.2.3 Fabrics: If used, is certified by GECA or other ecolabel 3.2.4 Glass: Not used. Also, colouring agents containing lead, cadmium, mercury, chromium, arsenic or selenium are not used. 3.2.5 Rubber: Certified by GECA 03 Recycled Rubber Products 3.2.6 Metals and Alloys: Coatings do not contain cadmium, nickel, tin or chromium (some exceptions). Coatings do not prevent recycling (exception: screws, bolts). Coatings conform to standards if they exist. 3.2.7 Gypsum: Plasterboard is not formulated with phosphogypsum 3.2.8 Adhesives: If used, are certified by GECA or other ecolabel 3.2.9 Coatings and Treatments: Does not prevent recycling (some exceptions). Paints and waterproofing treatments are GECA certified or other ecolabel. 3.3.1 Overall Loads: Manufacture does not add arsenic (1), cadmium (1), chromium (1), copper, lead, tin, mercury (1), antimony, elemental fluorine or chlorine, pentachlorophenol, tar oils. Levels (1) are <1mg/kg or <10mg/kg for lead 3.3.2 Prohibited Substances: The following are not added or used: Halogenated organic solvents or binding agents, fluoropolymer additives, analine based amines, phthalates, aziridine or polyaziridines, additives containing lead tin arsenic cadmium etc 3.3.3 Possible Radioactive Sources: Radioactive safety are demonstrated by either direct physical measurement (gamma spectrometry) or chemical composition (limits by mass) 3.4.1 Recycled Content Requirements: Products containing aluminium, stainless steel, plastics or gypsum/other minerals are subject to recycled content requirements 3.4.2 Waste minimization: Policies are in place to minimize waste including recycling of waste materials from the production process 3.5.1 Product Custodianship: If product is not recyclable, product will be accepted without additional cost (excluding transport costs) for further recycling, or have arrangements with a local recycler to accept it, or have a product stewardship program 3.5.2 Packaging Requirements: Chlorinated or halogenated plastics are not used. Used packaging can be recycled by local recycling systems. 3.5.3 Product Information: Provided on intended use, maximizing product lifetime, maintenance (if required) and recycling 4 Compliant to Environmental Regulations 5 Compliant to Labour, Anti-Discrimination and Safety Regulations
product photo BGC Ecoboard Plasterboard BGC Plasterboard
Plasterboard made from natural gypsum and incorporating 10% or greater recycled content from pre- or post- consumer waste streams.
BGC Plasterboard Pty Ltd has had the plasterboard products tested by CSIRO according to relevant requirements of the Building Code of Australia. The natural fibre used in the paper plasterboard liner is sourced from a supplier that hold an FSC Certificate for 100% recycled FSC certified recycled source. Yes Yes Environmental Assurance has determined that the formaldehyde emissions do not exceed the maximum allowable limits set in the standard. Yes Environmental Assurance confirms that the glass does not incorporate laminating, wire reinforcement, mirror glass, or pigments and additives. Yes Yes Yes Yes Yes None of the hazardous or prohibited substances are present in the nominated BGC Plasterboard product. Yes Yes BGC Plasterboard incorporates pre- and post- consumer recycled content back into the manufacturing line and have committed to incorporate a minimum of 10% recycled content into the nominated Ecoboard Plasterboard product. Yes Yes Yes BGC Plasterboard provides end users with all relevant information as required by this criterion. The installation instruction booklet is also available for download from the company website. Yes Yes
product photo Decoline and Raw Board E0 and E1 Particleboard D&R Henderson Pty Ltd
The nominated D&R Henderson products have been tested according to either AS/NZS 1859.1 or JIS A 5908:2003 in an accredited third party laboratory No D&R Henderson does not treat wood fiber with fungicides or insecticides. Yes All nominated products fall under the 1.0mg/l limit for formaldehyde emissions set in the standard for the AS/NZS 4266:16 Formaldehyde Emissions : Desiccator Method Yes None of the restricted additives listed for this criterion in the standard are added to the ABS Edge Band component of the nominated products. Yes Yes Yes Yes Yes Environmental Assurance confirms that none of the listed hazardous substances listed for corresponding criterion in the standard are intentionally added to the products under assessment during manufacture. Yes Yes Yes Yes Yes There is sufficient product information available in the product Technical Data Sheets, MSDS and product custodianship documents to satisfy the requirements of the corresponding criterion in the Standard. Yes Yes
product photo easyvj, easyregency, easyline, easyascot Easycraft Australia
Wall lining panels
Yes Easycraft sources a 100% of its timber for the products subject of this EPD from Laminex. The Boards used to make the finished products is Laminex MDF MR. Yes The board used for Easycraft is 100% MDF MR from Laminex. This timber panel range is already certified by GECA under licence LA-2005, and therefore compliant with this criterion. Yes The board used for Easycraft is 100% MDF MR from Laminex. This timber panel range is already certified by GECA under licence LA-2005, and therefore compliant with this criterion. Yes The only plastic component of the nominated Easycraft products is a thin strip that binds the boards together, due to the size and nature of this component it is impractical to apply a resin code to this component. A review of MSDS for primer, polypropylene and recommended adhesives by GECS finds none of the substances listed in this criterion to be used in the manufacturing of the products under assessment. Section c and d of this criterion are not applicable. The Easycraft Australia products do not contain any fabrics; this criterion is therefore not applicable. The Easycraft Australia products do not contain any glass; this criterion is therefore not applicable. Yes Yes Yes Yes Yes In order to establish compliance with the requirements of this criterion, GECS reviewed MSDS and product formulations for all substances used in the manufacturing process, and found that none of the substances listed in this criterion are used Yes Yes This criterion is not applicable to the Easycraft product range as they do not contain any of the materials in the quantities dealt with by this criterion. Yes Yes Yes A review of product brochure supplied to GECS confirms compliance to most sections of this criterion; however, recycling information is currently not included. Yes Yes
product photo Enviro 13mm SoundSTOP Board, Enviro 13mm Standard Core Board Boral Australian Gypsum
Plasterboard
These nominated Boral Australian Gypsum Ltd products are manufactured in an ISO 9001:2008 certified facility. The cellulose fibres contained in these products is sourced from 100% recycled paper. Yes Yes Yes Yes Yes Yes Yes Yes GECS has determined that no hazardous or prohibited substances are used or added to these products during their manufacturing. Yes Yes GECS has determined that these nominated Boral Australian Gypsum Ltd products contain a recycled content that is above the minimum requirements as stated in the requirements for this criterion. Yes Yes Yes Boral Australian Gypsum Ltd has a Plasterboard Product Manual (PB102) available for these Enviro products. This document covers instructions for use, installation, maintenance, cleaning, repair, storage and recycling. Yes Yes
product photo Gyprock EC08, EC09 CSR Building Products (CSR Gyprock)
Gypsum Plasterboard - fire grade board
CSR have real-time internal quality assessment testing and periodic external testing. Yes Yes Yes Yes Yes Yes Yes No additives restricted under this criterion are used in the manufacture of Gyprock EC08 and EC09 plasterboard. Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes The product information supplied by CSR is in accordance with this criterion. The product custodianship offer is to be placed on the CSR Gyprock website. Yes Yes
product photo Masonite Underlay, Dual Bond E0, Masonite Dura-Cote Australian Hardboards
Masonite Hardboards
Yes Australian Hardboards sources their wood, for these nominated products, from Forestry NSW who are certified to Australian Forestry Standard - AS 4708:2007 (AFS). Some of the Dura-Cote product is imported from a company that manages their own plantation. Yes The hardwood sourced from Forestry NSW is exempt from treatment as this is sourced from within Australia. The imported component of the Dura-Cote product does not require treatment as stated in AQIS Condition C10219. Yes These nominated products have been tested for their formaldehyde emissions in accordance with ASTM D5116 and achieved an E0 rating. The Dura-Cote product uses a resin with a free formaldehyde content of less than 5%. Yes Yes Yes Yes Yes Yes Yes Yes None of the listed hazardous or prohibited substances are present or used during the manufacturing of these nominated Australian Hardboards products. Yes Yes Yes Yes Yes Yes Yes Yes
product photo Powerscape /Fiberock Aquatuff Health USG
High recycled content gypsum fiberboard Utility Wall Lining
Yes There is a recycled content much higher than 5% in the Powerscape Gypsum Utility Wall Liners. Phosphogypsum is not used. The boards do not contain carcinogens with available exposure pathways when used in the manner specified by the manufacturer. Yes Yes Yes The US manufacturer of the certified Powerscape Health product monitors the release of air emissions according to the Clean Air Act. The company also operates under a permit for the discharge of waste water. Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes The USG Pty Ltd certified Powerscape product is not impregnated, labeled or coated in any way that prevents recycling. Yes Yes Yes Yes Yes Yes

© 2005, Good Environmental Choice Australia. ALL RIGHT RESERVED